淡江大學機構典藏:Item 987654321/45811
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62830/95882 (66%)
造訪人次 : 4084010      線上人數 : 285
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/45811


    題名: An elasto-plastic finite-element analysis of the metal sheet redrawing process
    作者: Huang, You-min;李經綸;Li, Ching-lun
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: Redrawing process;Elasto-plastic;Finite-element
    日期: 1999-05-01
    上傳時間: 2010-03-26 20:00:08 (UTC+8)
    出版者: Elsevier
    摘要: A methodology for formulating an elasto-plastic finite-element model, based on an updated Lagrangian formulation and the Prandtl–Reuss flow rule, was developed to simulate the redrawing process of axisymmetric sheet metal. An extended rmin algorithm is proposed to formulate the boundary conditions, such as nodal penetration and separation, alteration of the sliding direction of friction, linearization of strains increments and rotational increments and altered elasto-plastic state of the material. A modified Coulomb’s friction law is introduced to describe the alternation between the sliding state and sticking state of faction at the contact interface. The corresponding stiffness equations and solution algorithms are introduced. According to the developed finite-element model, the redrawing process of sheet metal is simulated. Simulation results, such as: (i) the whole deformation history; (ii) the entire loading process history; and (iii) thickness of the workpieces, etc. can be obtained. The simulation clearly demonstrates the efficiency of the model to simulate the redrawing process of sheet metal. This paper has provided a greater understanding of the redrawing process which can lead to improvements in the manufacturing process and in the design of tools.
    關聯: Journal of materials processing technology 89-90, pp.331-338
    DOI: 10.1016/S0924-0136(99)00014-X
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    0KbUnknown271檢視/開啟
    An elasto-plastic finite-element analysis of the metal sheet redrawing process.pdf180KbAdobe PDF21檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋