A manufacturing technique for 3D polymer micro-venturi tube

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/45805

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/45805

题名:	A manufacturing technique for 3D polymer micro-venturi tube
作者:	陳育堂;Chen, Y. T.;康尚文;Kang, Shung-wen;張碧峰;Chang, P. F.
贡献者:	淡江大學機械與機電工程學系
关键词:	Polymer micro-manufacturing technique;Micro-venturi tube;Throat size;Polymethylmethacrylate
日期:	2003-03
上传时间:	2010-03-26 19:59:19 (UTC+8)
出版者:	Elsevier
摘要:	Micro-shaping techniques have been realized for various applications. In this paper, a polymer micro-manufacturing technique is proposed to fabricate 3D micro-venturi tubes. Polymethylmethacrylate (PMMA) was dipped in methyl for 2 h to fully generate the physical–chemical change. The PMMA swelling appeared through the mass transfer effect. The swelling effect techniques used on various adhesives for attaching polycarbonate to PMMA are discussed. This polymer swelling process was implemented to form the 3D micro-venturi tube into a curved nozzle with the throat size successfully reduced to 100 μm. This paper presents an economical fabrication process for micro-venturi tubes for future analysis in micro-technologies.
關聯:	International journal of machine tools & manufacture 43(4), pp.421-424
DOI:	10.1016/S0890-6955(02)00262-6
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
		0Kb	Unknown	398	检视/开启
A manufacturing technique for 3D polymer micro-venturi tube.pdf		174Kb	Adobe PDF	1	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章