淡江大學機構典藏:Item 987654321/45801
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62822/95882 (66%)
造访人次 : 4013921      在线人数 : 880
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/45801


    题名: A digital current control technique for voltage-fed induction motor drives
    作者: 楊勝明=Yang, Sheng-ming;林逢傑=Lin, Feng-chieh
    贡献者: 淡江大學機械與機電工程學系
    日期: 2002-12
    上传时间: 2010-03-26 19:59:03 (UTC+8)
    出版者: Taylor & Francis
    摘要: Precise control of stator current is essential to high performance field orientation controlled induction motor drives. Any current error degrades the performance of the drive in the same way as incorrect tuning of field orientation. Previous research has shown that accurate current control can be achieved with intelligent but complex control algorithms. This paper presents a new current control scheme which can achieve high accuracy and fast dynamic response but which is very simple for microprocessor implementation. The scheme was derived using the discrete state space modelling of the induction motor. The control law does not require knowledge of rotor flux and was independent of the field orientation control tuning. Good static and dynamic performances were obtained in both the simulation and experimental verifications. The results also show that the leakage inductance model error might cause a current ripple. However, this parameter can be tuned to its correct value easily by inspecting the current response.
    關聯: International journal of electronics 89(12), pp.877-887
    DOI: 10.1080/0020721031000121253
    显示于类别:[機械與機電工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 大小格式浏览次数
    0KbUnknown363检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈