Imposing compliance on grinding and polishing

doi:10.1504/IJMPT.2005.006457

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/45738

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/45738

題名:	Imposing compliance on grinding and polishing
作者:	劉昭華;Liu, Chao-hwa;Chen, C.-C. A.;Li, Po-i;Hsu, Ta-chieh
貢獻者:	淡江大學機械與機電工程學系
關鍵詞:	polishing;grinding;mould and die;process compliance;error compensation;tool wear;position errors;geometry errors;surface roughness;Taguchi methods;parameter design
日期:	2005-01-01
上傳時間:	2010-03-26 19:50:49 (UTC+8)
出版者:	Inderscience
摘要:	Compliance is imposed upon the workpiece holder of a polishing/grinding system. Experiment results show that in a polishing process compliance may compensate position and geometry errors of the workpiece, and also compensate errors due to tool wear. During a grinding process it is shown that compliance may absorb high frequency disturbance from the outside, making grinding results unaffected. For a polishing system with compliance, experiment results suggest that soft springs (i.e. springs with greater values of compliance) may compensate workpiece geometry error better. Also, surface roughness decrease with increasing either translational or rotation speed of the polishing ring, and, up to a limit, a smaller pre-load depth gives rise to a smoother surface. A series of experiments based on Taguchi's method for parameter design are performed to determine better combinations of compliance with other polishing parameters, and results show that surface roughness may be greatly reduced.
關聯:	International Journal of Materials and Product Technology 22(4), pp.274-288
DOI:	10.1504/IJMPT.2005.006457
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
index.html	0Kb	HTML	16	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....