Optimal design methodology of plate-fin heat sinks for electronic cooling using entropy generation strategy

doi:10.1109/TCAPT.2004.831812

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/45723

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/45723

題名:	Optimal design methodology of plate-fin heat sinks for electronic cooling using entropy generation strategy
作者:	Shih, C. J.;Liu, G. C.
貢獻者:	淡江大學機械與機電工程學系
日期:	2004-09
上傳時間:	2010-03-26 19:49:35 (UTC+8)
出版者:	Piscataway: Institute of Electrical and Electronics Engineers (IEEE)
摘要:	This paper presents a formal systematic optimization process to plate-fins heat sink design for dissipating the maximum heat generation from electronic component by applying the entropy generation rate to obtain the highest heat transfer efficiency. The design investigations demonstrate the thermal performance with horizontal inlet cooling stream is slightly superior to that with vertical inlet cooling stream. However, the design of vertical inlet stream model can yield to a less structural mass (volume) required than that of horizontal inlet stream model under the same amount of heat dissipation. In this paper, the constrained optimization of plate-fins heat sink design with vertical inlet stream model is developed to achieve enhanced thermal performance. The number of fins and the aspect ratio are the most responsive factors for influencing thermal performances. The heat sink used on AMD Thunderbird 1-GHz processor has been examined and redesigned by presenting optimization methodology. The optimal thermal analysis has a very good agreement to the both of vendors' announced information and using simulation of parabolic hyperbolic or elliptic numerical integration code series (PHOENICS). The optimum design that minimizes entropy generation rate in this paper primarily applied three criteria for plate-fins heat sink optimal design: formal constrained nonlinear programming to obtain the maximum heat dissipation; prescribed heat dissipation; prescribed surface temperature. As a result, the thermal performance can be notably improved; both the sink size and structural mass can apparently be reduced through the presented design method and process. This analysis and design methodology can be further applied to other finned type heat sink designs.
關聯:	IEEE Transactions on Components and Packaging Technologies 27(3), pp.551-559
DOI:	10.1109/TCAPT.2004.831812
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
1521-3331_27(3)p551-559.pdf		615Kb	Adobe PDF	2377	檢視/開啟
Optimal design methodology of plate-fin heat sinks for electronic cooling using entropy generation strategy.pdf		612Kb	Adobe PDF	1	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....