A study on process and tribological behavior of Al alloy/Gr. (p) composite

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/45693

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/45693

題名:	A study on process and tribological behavior of Al alloy/Gr. (p) composite
作者:	林清彬;Lin, C. B.;Chang, R. J.;Weng, W. P.
貢獻者:	淡江大學機械與機電工程學系
關鍵詞:	Aluminum matrix graphite particulate composite;Tensile;Hardness;Wear;Plough;Tribological
日期:	1998-05-15
上傳時間:	2010-03-26 19:45:00 (UTC+8)
出版者:	Elsevier
摘要:	A process and an equipment have been successfully used to manufacture 6061 aluminum alloy/0–6 wt.% (6 μm) graphite particulate composite material. The graphite particulates are distributed uniformly within the Al alloy matrix. The results showed that tensile properties of these composites have been reduced. However, the hardness is remaining practically unchanged. In the wear microstructure of the unreinforced alloy, we can observe the ploughing generated by the hard Al chip clusters on the wearing material. The tribological behavior of the composites in the T6 heat-treated condition is better than in the annealed condition or than that of the unreinforced alloy. The wear weight loss is reduced with increasing content of graphite particulates and sliding speed.
關聯:	Wear 217(2), pp.167-174
DOI:	10.1016/S0043-1648(98)00192-6
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
		0Kb	Unknown	328	檢視/開啟
A study on process and tribological behavior of Al alloy Gr. (p) composite.pdf		488Kb	Adobe PDF	1	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章