Performance Testing of Micro Loop Heat Pipes

doi:10.6180/jase.2005.8.2.05

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/45674

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/45674

題名:	Performance Testing of Micro Loop Heat Pipes
作者:	Hsu, Chin-chun;康尚文;Kang, Shung-wen;Hou, Tung-fu
貢獻者:	淡江大學機械與機電工程學系
關鍵詞:	Micro Loop Heat Pipes;Two Phase Flow;Non-condensable Gas;Thermal Resistance
日期:	2005-06-01
上傳時間:	2010-03-26 19:43:44 (UTC+8)
出版者:	淡江大學
摘要:	A 60 mm×33 mm×0.8 mm micro loop heat pipe (MLHP), consisting of an evaporator, vapor line, condenser and two liquid lines, was fabricated and characterized. The wicking structure consists of parallel V-grooves with a hydraulic diameter of 47 μm, 67 μm and 83 μm, and is formed by bulk silicon etching. The MLHP was realized by bonding a glass wafer onto a silicon substrate, so as to result in a transparent cover for two-phase flow visualization. Water and methanol were used as the working fluids. The test results showed that water demonstrates a wider heat load performance range (3.3W~12.96W) than methanol (1.2W~5.85W) for the MLHP with an evaporator area of 1 cm^2 and condenser temperature of 17℃. The best thermal resistance of the MLHP was 0.106℃/W, 64 times higher than that without fluid filling. The smaller diameter grooves caused the higher liquid capillarity and enhanced transfer capacity. It was observed that the presence of non-condensable gas negatively affected the reliability of the MLHP and significantly reduced the performance.
關聯:	淡江理工學刊=Tamkang Journal of Science and Engineering 8(2), pp.123-132
DOI:	10.6180/jase.2005.8.2.05
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
		0Kb	Unknown	356	檢視/開啟
1560-6686_8-2-5.pdf		1453Kb	Adobe PDF	497	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....