The effect of continuous cooling heat treatment on interface properties of SK3/copper compound casting

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/45661

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/45661

題名:	The effect of continuous cooling heat treatment on interface properties of SK3/copper compound casting
作者:	Lin, C. B.;Ho, Jin-shin
貢獻者:	淡江大學機械與機電工程學系
關鍵詞:	compound casting;continuous cooling;copper/steel cladding
日期:	2000-02
上傳時間:	2010-03-26 19:42:48 (UTC+8)
出版者:	New York: Springer New York LLC
摘要:	The bonding of an SK3 steel insert to copper during cast welding and heat treatment was studied. The interface shear strength was made with a push-out test. After cast welding, a cast welding layer formed between SK3 steel and copper. After a continuous cooling heat treatment, there was a cast welding layer near the SK3 steel matrix, an irregular layer near the copper matrix, and a middle layer between them. X-ray diffraction analysis was used to determine that the interface layer consisted of carbon and CuFeO2. Through electron probe x-ray microanalysis (EPMA), it was shown that mainly iron atoms and carbons diffused into the copper matrix. The interface shear strengths of the compound casting while with water quenched, oil quenched, air cooled, and furnace cooled, were 23.42, 18.74, 12.29, 13.43, and 8.33 MPa, all of heat treatment fractures in the cast welding layer near the SK3 steel matrix.
關聯:	Journal of materials engineering and performance 9(1), pp.81-87
DOI:	10.1361/105994900770346312
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
		0Kb	Unknown	351	檢視/開啟
1059-9495_9(1)p81-87.pdf		519Kb	Adobe PDF	329	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章