淡江大學機構典藏:Item 987654321/44637
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62822/95882 (66%)
造访人次 : 4029424      在线人数 : 565
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/44637


    题名: 紊流對二維矩柱分離剪力層發展之影響
    其它题名: The development of separation shear layer of rectangular cylinder in 2-D turbulent flows
    作者: 盧博堅;鄭啟明;楊威
    贡献者: 淡江大學水資源及環境工程學系;淡江大學土木工程學系
    关键词: 紊流強度;紊流長度尺度;分離剪力層;Turbulence intensity;Turbulence length scale;Separated shear layer
    日期: 1995-06
    上传时间: 2013-03-12 11:26:12 (UTC+8)
    出版者: 新竹市：中華民國力學學會
    摘要: 本文藉著風洞實驗來探討均勻紊流場流經二維矩形斷面柱體後之分離剪力層發展情形。實驗之控制參數為：一、逼進流場紊流強度；二、紊流長度尺度；三、模型側風面高度與迎風面寬度之比值。實驗以裂膜探針對模型之分離剪力層進行速度量測，同時以壓力計由模型側面之壓力孔來量測風壓。以求得之速度剖面和壓力場之分佈，來說明前述控制參數對分離剪力層的影響。研究結果顯示矩形模型之分離剪力層隨紊流強度增加而變厚，如有再接觸現象的發生，則會縮短分離氣泡的長度，亦即紊流強度會增加剪力層之曲率。另外結果也顯示，模型側面壓力場之分佈，再接觸前受逼進流場所影響，再接觸後則受下游渦旋區所主控。模型平均壓力和擾動壓力皆隨高寬比之增加而減少。至於紊流長度所造成之影響則並不明顯。An experimental investigation was carried out to study the characteristics of the separated shear layer of rectangular cylinders in two dimensional homogeneous turbulent flows. The data were collected due to the variations of (1) turbulence intensity (2) turbulence length scale (3) depth-to-height ratio. Simultaneously measurements of the surface pressure on the lateral side and the shear layer velocity were performed using pressure taps and split-hot-film respectively. The results were utilized to characterize the effects of the above variations on the development of the separated shear layer. The result shows that turbulence intensity increases the thickness of the separated shear layer and decreases the length of separation bubble when reattachment occurs. In other words turbulence intensity will increase the curvature of the shear layer. The pressure distribution on the lateral side before reattachment zone is influenced by the approach flow. However, after the reattachment zone the mean pressure coefficient and rms pressure coefficient decrease.
    關聯: 力學：中國力學學會期刊=The Chinese Journal of Mechanics 11(2)，頁117-123
    显示于类别:[土木工程學系暨研究所] 期刊論文
    [水資源及環境工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML299检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈