Solidification of Polymer Flow in a Cold-Walled Circular Channel

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/44312

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/44312

題名:	Solidification of Polymer Flow in a Cold-Walled Circular Channel
其他題名:	塑料射出成型冷澆道中之固化現象
作者:	Lin, Gwo-geng;Tseng, Hsieng-cheng;Ju, Yi-hsu
貢獻者:	淡江大學化學工程與材料工程學系
關鍵詞:	冷澆道;固化;射出成型;塑料
日期:	1987-05
上傳時間:	2013-03-12 11:21:14 (UTC+8)
出版者:	臺北市：中國化學工程學會
摘要:	The problem of transient melt solidification in the runner during the injection molding process is investigated by the use of a boundary-tracking baaed finite difference method. Simulated results reveal that the thickness of the solid layer is from 1 to 5 percent of the radius of a circular runner when the length is up to 25 cm. It also shows that, for a circular runner with a length of 48em and a radius of 0.48 cm, the calculated pressure drop is lower than that obtained by the TM1C program developed by CIMP (The Cornell Injection Molding Project) in which the melt solidification is ignored. An explanation is riven by examining the shear rate and the temperature distributions in the runner. This method can be used in a runner design routine to balance the flow in the runner of an injection mold by varying its diameter or length. 本文利用一種可以追蹤遍界移動的有限差分法來研究塑料射出成型中澆道內之流動固化現象。研究結果顯示在25公分長的圓形澆道，其固化層厚度(PP材料)約為澆道半徑之1~5%。同時，研究模擬出來之壓降比沒有考慮固化現象所計算之壓降略低；這可以從進一步探討剪率和溫度分佈，而得到合理的解釋。本研究方法可應用於澆道設計中'藉改變其半徑或長度而得到平衡之流量；並可預估壓降。
關聯:	Journal of the Chinese Institute of Chemical Engineers=中國化學工程學會會誌 18(3), pp.179-187
顯示於類別:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
index.html	0Kb	HTML	218	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....