Ultrafine MnFeO4 powder preparation by combusting the coprecipitate with and without Mg2+ or Zn2+ additives

doi:10.1557/JMR.2000.0028

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/44160

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/44160

题名:	Ultrafine MnFeO4 powder preparation by combusting the coprecipitate with and without Mg2+ or Zn2+ additives
作者:	Yu, Hsuan-fu;Zhong, Wen-bing
贡献者:	淡江大學化學工程與材料工程學系
日期:	2000-01
上传时间:	2010-03-09 09:59:38 (UTC+8)
出版者:	New York: Cambridge University Press
摘要:	Ultrafine MnFe2O4 powder with its crystallites less than 100 nm was prepared using a combustion process. The coprecipitates containing the stoichiometric amount of Mn2+ and Fe3+ to form MnFe2O4 were prepared by dissolving the required metallic nitrates in de-ionized water and adding NH4OH to adjust the pH of the solutions to 9. The collected dried precipitates were then heated up to predetermined temperatures and then quickly contacted with the acetone spray. Upon contacting with the heated precipitates, the acetone spray was ignited. The combustion of acetone caused the precipitates to form crystalline MnFe2O4 without chemical segregation. The crystallinity of MnFe2O4 powder so obtained depended on the ignition temperature of acetone spray. MnFe2O4 powder obtained at acetone ignition temperature of 773 K had higher crystallinity than that obtained at acetone ignition temperature of 523 K. The presence of a small amount of Mg2+ or Zn2+ in the composition of the coprecipitates promoted the mobility of constituent ions of the combusted powder and resulted in bigger MnFe2O4 crystallites at a lower acetone ignition temperature.
關聯:	Journal of materials research 15(1), pp.170-175
DOI:	10.1557/JMR.2000.0028
显示于类别:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
-JMR-JMR15_01-S088429140005370Xa.pdf		549Kb	Adobe PDF	361	检视/开启
index.html		0Kb	HTML	382	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....