Path planning for robot-assisted grinding processes

doi:10.1109/ROBOT.2001.932573

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 會議論文 > Item 987654321/38190

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/38190

题名:	Path planning for robot-assisted grinding processes
作者:	Wang, Yin-tien;Jan, Y. J.
贡献者:	淡江大學機械與機電工程學系
日期:	2001-05
上传时间:	2010-04-15 10:30:35 (UTC+8)
出版者:	Washington: IEEE Computer Society
摘要:	Path planning for a robot-assisted surface finishing system with an active torque controller is presented. We utilize a dexterous manipulator to attain the desired position and orientation in three-dimensional space during finishing processes. A single-axis active controller consists of a DC motor and a software observer is attached to the robot wrist and used to actuate a pneumatic hand-grinder. The torque observer is designed to sense the grinding contact force based on the driving current and output position of the motor. Zigzag and fractal paths on curved surfaces are designed for the grinding processes. In order to determine an ideal grinding condition, Taguchi's method for experimental design is utilized. We choose four grinding conditions, namely, path pattern, grinding contact pressure, tool diameter, and feed rate. Tendencies of these factors can be found from the experiments. In this research, the prototype of a robot-assisted finishing system is constructed and tested on a Tatung A330 robot. The experimental results show that the robot-assisted finishing system functions well under a variety of grinding conditions.
關聯:	Robotics and Automation, 2001. Proceedings 2001 ICRA. IEEE International Conference on (Volume:1 ), pp.331-336
DOI:	10.1109/ROBOT.2001.932573
显示于类别:	[機械與機電工程學系暨研究所] 會議論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	243	检视/开启
Path planning for robot-assisted grinding processes.pdf		626Kb	Adobe PDF	828	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....