Micro pressure sensor with submillimeter size by the silicon bulk micromachining

doi:10.1117/12.360503

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 會議論文 > Item 987654321/38050

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/38050

題名:	Micro pressure sensor with submillimeter size by the silicon bulk micromachining
作者:	楊龍杰;Yang, Lung-jieh;Chang, Y. M.
貢獻者:	淡江大學機械與機電工程學系
日期:	1999-09-20
上傳時間:	2010-01-11 14:35:03 (UTC+8)
摘要:	This paper proposed a new direction for the miniaturization of silicon bulk-machined sensors. Herein, the glass substrate bonded with the silicon wafer substitutes the role of the silicon wafer itself. Then the whole silicon wafer with sensing portions, whatever piezo-resistive or capacitive types, could be all machined to the membrane structure without chip-area wasting on the (111)-face slopes. Basically, the chip size by this semi-SOI method would be as small as the surface-machined one in principle, if the silicon-glass bonding process is guaranteed. The other advantages of this strategy include the process compatibility with the different sensing principles and the different techniques of membrane machining. The on-chip circuitry of sensors could be also preserved. Another important issue is that the surface- machining-link membrane now is mono-crystalline, which means the stable mechanical properties and reproducible characteristics. This new strategy practically augmented the mass production of piezoresistive pressure sensors using in tire pressure gauges and other industrial pressure meters. The 1.0 mm X 0.8 mm X 0.5 mm of sensor size with chip density exceeds 5,000 per 4-inch wafer was successfully fabricated. Some engineering applications used this new pressure sensor to solve their corresponding problems.
關聯:	SPIE's symp. on micromachining and microfabrication v.3876-32
DOI:	10.1117/12.360503
顯示於類別:	[機械與機電工程學系暨研究所] 會議論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
index.html	0Kb	HTML	226	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....