淡江大學機構典藏:Item 987654321/37834
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62830/95882 (66%)
造訪人次 : 4074835      線上人數 : 868
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/37834


    題名: 金屬方板對角線彎曲成形製程之分析
    其他題名: The Analysis of Diagonal Bending Process of Square Metal Sheet
    作者: 李經綸;Li, Ching-lun;蕭銘仕;Hsiao, Ming-Shih
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: 金屬成形;彈塑性;有限元素;彎曲;Metal forming;Elasto-plastic;Finite element;Bending
    日期: 2002-12
    上傳時間: 2010-01-11 14:11:58 (UTC+8)
    摘要: 本文採用Prandtl-Reuss 之塑流法則和Hill 的異向性降伏準則，結合有限變形理論，及Updated Lagrangian Formulation (ULF)的觀念，建立一增量型彈塑性大變形的三維有限元素分析程式，以探討方板對角線彎曲成形之沖頭負荷與衝程關係、應力分佈、應變分佈、變形歷程、前彈現象及工件厚度變化等，並設計一組V 型90馬勿s曲成形模具加以實驗，以驗證程式的可信度。經數值分析與實驗結果比較得知，成形工件之最終外形於對角線方向兩側之角隅處產生向下彎曲現象，且工件於除荷後發生前彈現象，其數值分析之前彈角度為86.8陛A與實驗中所量得之前彈角度86.64鬲蛪穜答鞢A故可驗證本三維有限元素分析程式的可信度及正確性。
    A methodology for formulating an elasto-plastic finite element model, based on the Updated Lagrangian Formulation, Prandtl-Reuss flow rule, and Hill's yield criterion is developed to analyze diagonal bend ing process of the square metal sheet. Simulation results include the relationship between punch load and punch stroke, the distribution of the stress, the distribution of the strain, deformation diagrams in different forming stages, phenomenon of springforward, and variation of the workpiece thickness. A set of 90.degree. V-shaped tools are designed for experiments to verify the reliability of the program. According to the simulation and experiment results, the sharp end of the workpiece along diagonal direction was bent down and springforward after unloading in the final process of bending. The simulated angle of springforward of the workpiece was 86.80.degree. and the experimental angle of springforward was 86.64.degree.. Simulation results show good agreement with experiments that can be used to verify the reliability and accuracy of the three-dimensional finite element program in this study.
    關聯: 中華民國力學學會第二十六屆年會暨全國力學會議論文集，12頁
    顯示於類別:[機械與機電工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    金屬方板對角線彎曲成形製程之分析_中文摘要.docx摘要15KbMicrosoft Word166檢視/開啟
    金屬方板對角線彎曲成形製程之分析_英文摘要.docx摘要15KbMicrosoft Word83檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋