淡江大學機構典藏:Item 987654321/37828
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62822/95882 (66%)
造訪人次 : 4015856      線上人數 : 546
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/37828


    題名: 金屬板材半球型沖頭之孔凸緣貫穿成形分析
    其他題名: The Analysis on the Hole-Flanging Penetration Process of Sheet Metal with Semi-Spherical Punch
    作者: 李經綸;Li, Ching-lun;陳振德;Chen, Jen-De;李章詠;Li, Chang-Yung
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: 彈塑性;有限元素;孔凸緣;貫穿;Elasto-plastic;Finite element;Hole- flanging;Penetration
    日期: 2002-12
    上傳時間: 2010-01-11 14:11:34 (UTC+8)
    摘要: 本文採用Prandtl-Reuss 塑流法則和Hill 的降伏準則，結合有限變形理論及UpdatedLagrangian Formulation (ULF)的觀念建立一增量型彈塑性大變形有限元素分析程式，探討孔凸緣貫穿成形之等向性、正交異向性及異向性數值分析之沖頭負荷與衝程關係、工件厚度變化及成形極限等，並與實驗結果相比較，以確認本有限元素分析程式的正確性。經由不同Lankford 值R0，R45，R90，及不同沖頭圓弧角半徑對孔凸緣貫穿成形的影響得知，擴孔周緣於滾軋方向90 度的工件厚度大小，依序為異向性分析之厚度最厚，正交異向性次之，最薄為等向性，且在同方向的貫穿高度大小，依序為等向性分析之高度最高，正交異向性次之，異向性最低，而孔凸緣貫穿成形之最大沖頭負荷則隨著沖頭圓弧角半徑的增加而遞減。
    A methodology for formulating an elasto-plastic finite element model, which is based on Prandtl-Reuss flow rule and Hill's yield criterion respectively, associates with an Updated Lagrangian Formulation. The numerical simulation results include relations hip between punch load and punch displacement, variation of the workpiece thickness, and forming limit. The finite element model is developed to simulate isotropic, normal anisotropic, and anisotropic of hole-flanging penetration process. The accuracy of the finite element program is based on a comparison between the simulation and experiment outcomes. Several simulations are performed on diverse Lankford parameters R0, R45, R90 and distinct punch profile radius. When the orientation of expanded hole circumference to rolling direction is at 90.degree.,the thickness of workpieces is various from three types of analyses. Anisotropic analysis determines the thickest workpiece and isotropic analysis the thinnest. As to penetrated height, at the same orientation, isotropic analysis determines the highest workpiece and anisotropic analysis the lowest. When punch profile radius becomes greater, maximum punch load decreases progressively.
    關聯: 中華民國力學學會第二十六屆年會暨全國力學會議論文集，12頁
    顯示於類別:[機械與機電工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    金屬板材半球型沖頭之孔凸緣貫穿成形分析_中文摘要.docx摘要13KbMicrosoft Word188檢視/開啟
    金屬板材半球型沖頭之孔凸緣貫穿成形分析_英文摘要.docx摘要13KbMicrosoft Word95檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋