微生物發酵生產聚酯塑膠的裂解研究

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 會議論文 > Item 987654321/36949

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/36949

題名:	微生物發酵生產聚酯塑膠的裂解研究
其他題名:	Studies on Degradation of Polyester Produced from Microbial Fermentation
作者:	董崇民;Don, Trong-ming;鄭廖平;陳慶鐘;呂俊毅
貢獻者:	淡江大學化學工程與材料工程學系
關鍵詞:	生物可降解材料;聚β羥基丁酯;聚β羥基戊酯;微生物發酵;酵素水解
日期:	2004-02-21
上傳時間:	2010-01-11 11:54:12 (UTC+8)
摘要:	針對微生物發酵生產聚酯塑膠PHB, PHBV在不同環境下的降解做一探討。影響材料降解的因素很多，包括環境類型、微生物種類以及其活性、還有溫度、水分、所使用高分子材料結構及其表面組成型態。本研究利用乾式程序、濕式程序以及熱壓程序等不同加工方法將PHB, PHBV製成結晶度、結構、分子量以及孔隙度皆不同的薄膜，將薄膜浸入含有0.04g/dl溶菌素的pH7緩衝溶液中，於37.5℃下進行降解實驗。並於不同降解時間取出薄膜進行重量測試、分子量測量及熱重分析。結果發現於49天內不管是PHB或PHBV，重量幾乎不變，但是分子量下降，熱壓製備的PHB下降速率遠比熱壓製備的PHBV快。在熱重分析實驗中，於氮氣環境下，觀測其最大裂解溫度(Tmax)、起始裂解溫度(Tonset)及剩餘碳渣量(char)，並利用Ozawa數學模型求出其裂解活化能。 The degradability of bacterial plastics, poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV), was investigated. Three different processes were employed to produce PHB and PHBV films with different structures and morphologies such as crystallinity, molecular weight, porosity and surface morphology, The degradation experiment was undertaken by immersing sample films into a pH7 buffer solution containing 0.04 g/dl lysozyme at 37.5 degree C. It was observed that the weight of PHB or PHBV film was almost unchanged; but the molecular weight decreased with time up to 49 days, where the decreasing rate was faster for PHB. Thermal gravimetric analysis revealed that the onset degradation temperatures for PHB and PHBV were 258 degree C and 256 degree C, respectively, at a heating rate of 10 degree C/min. The char yield was near zero for both PHB and PHBV at 400 degree C. By using ozawa method, the activation energies of degradation for PHB and PHBV were 111kJ/mol and 119kJ/mol, respectively.
關聯:	2004高分子聯合會議：第二十七屆高分子研討會&九十三年高分子學會年會&九十三年國科會高分子學門研究成果發表會論文集，4頁
顯示於類別:	[化學工程與材料工程學系暨研究所] 會議論文

文件中的檔案:

沒有與此文件相關的檔案.

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....