淡江大學機構典藏:Item 987654321/36420
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 62822/95882 (66%)
Visitors : 4020776      Online Users : 985
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
    •  Adv. Search
    Home ‧ Login ‧ Upload ‧ Help ‧ About ‧ Administer Goto mobile version


    Please use this identifier to cite or link to this item: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/36420


    Title: 模型土釘在砂土中之拉出行為
    Other Titles: Pullout Behavior of Model Nail in Sand
    Authors: 吳朝賢;洪勇善;陳威志;紀柏全
    Contributors: 淡江大學土木工程學系
    Keywords: 土釘;粗糙度;視摩擦係數;拉出;Soil nailing;Roughness;Apparent friction coefficient;Pullout
    Date: 2005-09
    Issue Date: 2010-01-11 10:54:21 (UTC+8)
    Publisher: 臺北市:中華民國大地工程學會
    Abstract: 本研究為單根模型土釘在砂土中拉出行為的探討，研究參數包括土釘牙距、土釘直徑、砂土粒徑等；經試驗結果獲得：(1)當砂土平均粒徑小於土釘牙距時，尖峰、殘餘視摩擦係數隨螺紋牙距增大而增加，且顆粒越大，尖峰、殘餘值也越大；當砂土平均粒徑大於土釘牙距時，視摩擦係數則隨螺紋牙距之增加而增大，而殘餘視摩擦係數皆下降至某一範圍。(2)粗糙土釘隨直徑增大，視摩擦係數呈遞減的趨勢，但遞減的趨勢最後趨於平緩；殘餘視摩擦係數則隨不同粒徑之砂土而有固定的趨勢。(3)各試驗砂之拉出峰後殘餘行為皆不同：編號9矽砂隨位移增加而平滑下降，其拉出力殘餘值為尖峰值的50%~65%；編號315石英砂則有上下跳動之現象，其拉出力殘餘值為尖峰值的70%~80%；在編號313石英砂中的殘餘值趨向一定值(相差6%以內)。本研究透過一系列拉出試驗結果，配合定義之粗糙度與單一長度內螺紋數量，運用Luo之理論模式，歸納單釘視摩擦係數與粗糙度及螺紋數之關係。關係式分為平均砂土粒徑小於螺紋牙距(編號9矽砂、編號315石英砂)與大於螺紋牙距(編號313石英砂)兩種情況。預測值與試驗值相比，編號9矽砂相差13%；編號315石英砂相差6.1%；編號313 石英砂則相差17.2%。
    Pullout behavior of model nail in a sand box under various conditions was investigated through a series of laboratory tests. The conclusions from the result of laboratory experiment are summarized: (1) When D50 of the sand is smaller than the screw length, peak and residual apparent friction coefficients at the soil-nail interface are increased with the increase of screw length. When D50 of the sand is larger than the screw length, the peak apparent friction coefficient increases with the increase of screw length, but the residual apparent friction coefficient decreased and reaches a constant value. (2) The increase of sand particle creates greater value of the peak apparent friction coefficient. Apparent friction coefficient at residual varies with the particle size of the tested sand. (3) The residual pullout resistance for nail pulled out from No 9 silica and No. 315 sands decreased to 50-60% and 70-80% of peak values, respectively. The residual resistance of nail in No.313 Quartz sand reaches a constant value for all sizes of nails. According to the results of laboratory experiment, roughness was defined to evaluate the peak apparent friction coefficient from nail and soil properties. Two formulas are used for the D50 of sand is smaller and greater than screw length, respectively. The predicted values of silica sand are 13% greater than the values of laboratory experiment, while the No.315 Quartz sand and No. 313 quartz sand are 6.1% and 17.2% greater than the tested values.
    Relation: 2005第十一屆大地工程學術研討會暨國科會成果發表會論文集，8頁
    Appears in Collections:[Graduate Institute & Department of Civil Engineering] Proceeding

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML223View/Open
    模型土釘在砂土中之拉出行為_中文摘要.docx摘要16KbMicrosoft Word196View/Open
    模型土釘在砂土中之拉出行為_英文摘要.docx摘要16KbMicrosoft Word177View/Open

    All items in 機構典藏 are protected by copyright, with all rights reserved.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - Feedback