English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 49633/84879 (58%)
造訪人次 : 7691206      線上人數 : 88
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/36054


    題名: 電化學與化學程序去除染整廢水色度之比較研究
    其他題名: Comparison of dye colour removing with electrochemical and chemical processes
    作者: 曾馮弘;Tseng, Feng-hung
    貢獻者: 淡江大學水資源及環境工程學系碩士班
    陳俊成
    關鍵詞: 電化學;電化學膠凝作用;染料廢水;染料;色度去除;染整廢水;Electrochemical;Electrochemical coagulation;Dye waste waster;Dye stuff;Colour removal;Textile waste water
    日期: 2006
    上傳時間: 2010-01-11 07:31:23 (UTC+8)
    摘要: 紡織製造業中的染整廢水中含有高濃度的氯鹽、TSS、色度(colour)、COD、營養鹽類。以上這些污染物的生物降解性低,甚至有些染整廢水含有一些具毒性的介面活性劑,所以染整廢水是一具多樣性質且成分複雜的工業排放廢水。這些排放廢水不僅會影響環境的美觀,更對水體環境造成破壞。因為染料應用範圍廣,衍生的廢水性質複雜且對環境與人類的安全具有威脅,因此如何有效處理染料廢水,是水處理工程的重要課題。
    由於染料種類繁多,且應用範圍極為廣泛。本研究只針對反應性染料使用直接電化學方法、間接電化學方法及傳統化學方法作染料色度去除之反應程序參數研究,並且比較各種方法對於染料色度去除率的效果。
    本研究結果歸納如下:
    1. 不論是直接電化學方法或是間直接電化學方法,膠羽吸附劑的量隨著電壓之改變,所產生的量也不同。外加電壓越大所產出之膠羽濃度越高。
    2. 添加NaCl可增加溶液電導度以加速電化學反應。不論是直接電化學方法或間接電化學方法所生成之膠羽,均具有強大之吸附能力。
    3. 三種方法所產出之膠羽吸附劑,對染料溶液的色度都具有相當的去除效果。
    4. 比較傳統化學吸附方法與電化學方法處理染料後產生之廢棄污泥,電化學方法處理後的廢棄污泥較為穩定。
    5. 在通電過程中,反應槽中的氯鹽離子可以防止陽極極板上產生之氧化物而影響通電反應。
    6. 由本實驗得知電化學處理法可有效的縮短染料廢水的色度處理時間,且對染料廢水的色度有相當高的去除率。
    To sustain color in textile, several chemicals are usually added into dye to enhance the attachment of the dye on the textile. Hence the added chemicals induce pollution problem of the waste water, especially its color. The amount of dye related chemicals is about 50% of the total waste water. The color of the waste water is one of the water pollution indices which evoke people’s direct impression of water quality. Small amount of dissolved dye can cause decrease of water transparency and solubility of gases. Since most dyes are made of compounds with high molecular weight, they are difficult to be treated with biological processes.

    Several means are considered to remove color of waste water caused by dye; however rare processes are able to remove color and COD at the same time. Other than the technical drawback, the treatment cost usually prohibits their long term application. Past study has proved that electrochemical method (low voltage DC.) is capable to be used in removing color in waste water effectively in laboratory scale. Because the direct electrochemical method requires considerable space that limit its application in many site retrofit, an indirect electrochemical method is considered in this study. A chemical process is introduced first to produce coagulant and then an electrical method is applied in sequence to remove dye caused color in waste water. The findings from this study may be concluded as below:

    1.Both direct method and indirect method Fe-coagulation processes are effective for color removal from textile effluents.
    2.Sodium chloride is essential in this process because the existence of NaCl reduces power consumption.
    3.The by-product of the process, NaClO, is a strong oxidizing agent that can be used to further decompose the dye structure.
    4.The Fe-coagulation process is effective for color removal from textile effluents.
    5.Chemical method also is a good choice for color removal from textile effluents.
    6.The sludge of electrochemical methods are more stable than that of chemical method.
    顯示於類別:[水資源及環境工程學系暨研究所] 學位論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    0KbUnknown163檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋