藉由數位訊號處理器來實現的指紋辨識系統

淡江大學機構典藏 > 工學院 > 電機工程學系暨研究所 > 學位論文 > Item 987654321/35804

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/35804

题名:	藉由數位訊號處理器來實現的指紋辨識系統
其它题名:	Implementation of fingerprint identification system with digital signal processor
作者:	王宗彥;Wang, Chung-yen
贡献者:	淡江大學電機工程學系碩士班周永山;Chou, Yung-shan
关键词:	指紋辨識;數位訊號處理器;fingerprint identification;digital signal processor(DSP)
日期:	2007
上传时间:	2010-01-11 07:11:03 (UTC+8)
摘要:	本文以DSP來實現一套指紋辨識系統。首先，在軟體模擬上，採用國際指紋識別競賽（FVC2000）的指紋影像，以及祥群科技公司所出產的指紋擷取器（LTT-C500）所擷取出來的指紋影像來進行比對。由於祥群科技的指紋擷取器上有著固定的凹槽式設計，限制手指頭的偏移及旋轉量，可使辨識率大為提升。而在硬體方面，由指紋擷取器擷取出像素大小的指紋影像，透過串列的方式傳輸至DSP裡面的SDRAM，經過前處理、特徵處理以及比對處理，最後以綠色和紅色的LED燈號來顯示比對成功或是失敗。經過測試，硬體辨識結果與模擬結果大致相同，驗證了所實現指紋辨識系統之可行性。 In this thesis, we implement a fingerprint identification system using a digital signal processor (DSP). First, we perform computer simulations on the adopted fingerprint verification algorithm. Two sources of fingerprint images were tested, the first set is adopted from the database of Fingerprint Verification Competition 2000（FVC2000）. The second set is acquired by the sensor LTT-C500 manufactured by LighTuning Tech. Inc. Because of its fillister design which puts natural constraint on the position of the finger so that the errors incurred during the acquisition process are minimized, the identification rate has been greatly improved. Next, the acquired fingerprint images which are of size pixels are transmitted following the serial transmission protocol to the SDRAM of the DSP. After the processes of preprocessing, feature extraction, and matching, the results are shown on a LED where the green light and the red light indicate success and failure of the fingerprint identification task, respectively. Experiments demonstrate that the feasibility of the implemented fingerprint identification system.
显示于类别:	[電機工程學系暨研究所] 學位論文

文件中的档案:

档案	大小	格式	浏览次数
	0Kb	Unknown	310	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....