淡江大學機構典藏:Item 987654321/35670
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64178/96951 (66%)
造访人次 : 9385971      在线人数 : 464
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version
    Please use this identifier to cite or link to this item: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/35670


    Title: 具穩壓控制之太陽能陣列最大功率儲能系統
    Other Titles: Maximum power tracking with voltage regulator for the solar array power system
    Authors: 陳家宏;Chen, Chia-hong
    Contributors: 淡江大學電機工程學系博士班
    蕭瑛東;Hsiao, Ying-tung
    Keywords: 太陽能陣列;三點權位法;最大功率點追蹤;串接型返馳式電壓轉換器;Solar array;Maximum Power Point Tracking(MPPT);Three-Point Weight Comparison Method(TPWCM);Series Connect Boost Unit(SCBU);flyback converter
    Date: 2006
    Issue Date: 2010-01-11 06:59:26 (UTC+8)
    Abstract: 在傳統太陽能陣列發電系統中使用串聯或並聯二極體的方式並不能有效改進發電效率降低的問題,即使在電力轉換器前加上最大功率點追蹤電路也無法改善此問題。本論文提出一種改善太陽能陣列發電系統中,因某單一模組部份遮蔭或特性較差時,而使得整體發電效率嚴重下降的解決方法,並維持輸出直流電壓的穩定。本文提出的方法是在每一片太陽能電池模組輸出加上一個高效率之返馳式串聯連接的昇壓轉換器,其線性的輸出、入特性再結合三點權位最大功率追蹤電路,將使得單片太陽能電池模組同時擁有定電壓輸出及最大功率追蹤雙重特性。電路結構簡單,體積也小,幾乎只要放在電池模組背後的接線盒內即可。電池模組依然可以任意的串、並聯連接,若是模組發生部份遮蔭現象,也只影響該模組,對其他模組的發電量毫無影響。甚至不同品牌的太陽能電池模組,只要輸出電壓相近皆可串、並聯使用,不影響整體發電效率。另外,本文利用串接型返馳式電壓轉換器類似自耦變壓器特性,設計一昇壓電路,用來解決蓄電池組並聯充電與放電的問題,並加快充電時間。
    The electric power supplied by a photovoltaic power generation system depends on the solar radiation and temperature. Designing efficient PV systems heavily emphasizes to track the maximum power operating point. This work develops a novel three-point weight comparison method that avoids the oscillation problem of the perturbation and observation algorithm which is often employed to track the maximum power point. Furthermore, this study proposes the series connected boost unit integrated with the proposed maximum power point tracking algorithm to improve the efficiency of the solar system. Finally, this work implements a low cost control unit on a single chip based on the proposed method to adjust the output voltage of the solar cell array. Finally, experimental results confirm the performance of the proposed method.
    Appears in Collections:[Graduate Institute & Department of Electrical Engineering] Thesis

    Files in This Item:

    File SizeFormat
    0KbUnknown405View/Open

    All items in 機構典藏 are protected by copyright, with all rights reserved.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - Feedback