淡江大學機構典藏:Item 987654321/35547
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64191/96979 (66%)
造访人次 : 8219299      在线人数 : 7210
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/35547


    题名: 不同階梯形狀之背向階梯流場特性探討
    其它题名: Numerical simulation of flow over a backward-facing step with different configurations
    作者: 李奕賢;Lee, I-hsien
    贡献者: 淡江大學航空太空工程學系碩士班
    陳慶祥;Chen, Ching-shung
    关键词: 背向階梯;再接觸點;迴流區;backward-facing step;reattachment point;recirculation
    日期: 2006
    上传时间: 2010-01-11 06:45:54 (UTC+8)
    摘要: 背向階梯流場構造簡單，局部特性明顯，運用範圍廣泛，因此對於不同外在條件改變流場的研究是值得探討的。本論文針對改變階梯形狀，利用數值方法模擬其流場狀況，並觀察其再接觸點長度的變化。當再接觸長度增加，迴流區跟著增加，若是應用在燃燒室內，駐焰效果也會跟著增加。
    本論文數值方法為採用控制體積法來離散統御方程式，配合k-ε 紊流模式來閉合統御方程式，靠近壁面之計算域使用牆函數來計算，並採用六面體網格，經過網格獨立測試後採用45 萬網格數，使用商業軟體fluent 作為求解器。計算邊界條件：進口條件為流速3.8m/s 之均勻流，出口條件為環境壓力一大氣壓。針對五種不同的階梯形狀做計算，發現再接觸點長度會因為階梯形狀改變而改變。
    將計算結果和實驗結果比對會發現差異甚鉅，主因為進口速度過小，雷諾數位於過渡區內，而計算時是假設為紊流，造成了誤差的出現。另外對於使用不同的紊流模式，計算出來的結果是否相同，本論文也加以探討，發現背向階梯流場適用k-ε 紊流模式。將來可進一步針對改變階梯形狀對於熱效應之影響，或是加入冷卻噴流對冷卻系統的影響加以研究。
    Backward-facing step flow is a simple configuration with distinctlocal characters. It is quite useful in many fields. Five different shapeswere simulated numerically. We compared the change of the length of the reattachment point in each shape and find that the recirculation zone increases with the length of the reattachment point. This will enhance the flame holding effect in a combustion chamber.
    The flow field was calculated by a finite volume method, and a k-ε turbulence model was used to simulate the turbulent flow. A near wall function was used to compute the near wall area. The commercial software package, FLUENT, was used to simulate the flow field. Four hundred and fifty thousands hexahedron cells were used in the numerical simulations according to the grid independence study. The lengths of the reattachment points of five different shapes were compared with the experimental data.
    The agreement is not good. This is because the Reynolds numbers are in the transition zone, and we used a turbulence model to compute them. We also discussed the effects of different turbulence models on the solutions. We found that the k-ε turbulent model is most suitable for thebackward-facing step flows.
    显示于类别:[航空太空工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    0KbUnknown355检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈