淡江大學機構典藏:Item 987654321/35490
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62830/95882 (66%)
造访人次 : 4043765      在线人数 : 969
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/35490


    题名: 應用田口法與遺傳演算法於點字觸摸顯示方塑膠零組件射出成型最佳化參數研究
    其它题名: Application of taguchi method and genetic algorithm to the optimal parameters of injection molding for the plastic components of braille cell
    作者: 陳坤村;Chen, Kuen-tsuen
    贡献者: 淡江大學機械與機電工程學系碩士班
    葉豐輝;Yeh, Fung-huei
    关键词: 田口法;遺傳演算法;點字顯示方;最佳化;射出成型;Taguchi;Genetic Algorithm;Braille Cell;Optimal;Injection Molding
    日期: 2009
    上传时间: 2010-01-11 06:40:23 (UTC+8)
    摘要: 本研究係使用田口法與遺傳演算法探討點字觸摸顯示方ABS塑膠零組件射出成型最佳化參數之研究，以避免射出成品產生短射、變形及表面缺陷等問題。研究中先採用參數化繪圖軟體進行實體繪製，接而利用Moldex3D執行模流分析，探討每一項射出參數對塑膠材料射出成型的影響。由分析結果顯示，模具溫度、融膠溫度、壓力切換和填充時間為顯著因子，並導入田口法利用直交表配合信號雜訊比與變異數分析，獲得最佳射出參數與因子的影響程度，最後再導入遺傳演算法並經輪盤選擇、基因交配和基因突變世代族群演化來找出最佳目標值。
    本研究透過田口法與遺傳演算法皆可達成降低塑膠零組件變形、短射和表面缺陷等目標，從兩種方法所得結果比較顯示，遺傳演算法經過世代族群的演化最終的目標值會比田口法所獲得的目標值來得好，可證實遺傳演算法應用於射出成型加工因子最佳化搜尋的實用性。
    The thesis uses Taguchi method and genetic algorithm to study the optimal parameters of injection molding to avoid the deformation, short shot and surface defects for the ABS plastic components of Braille cell. At first the parametric drafting software is applied for the entity design and rendering. Then the Moldex3D software is used for mold flow analysis on the influence of each injection parameters. The results show mold temperature, melt temperature, injection pressure, and filling time are the most influential factors on reducing component deformation. Besides, the orthogonal array of Taguchi method is applied to compare with S/N (Signal Noise Ratio) and ANOVA (Analysis of Variation). The influence degree of factors and the optimal parameters of injection molding are obtained. Finally, genetic algorithm with roulette wheel selection, crossover, and mutation is applied to create a new set of population. The optimal parameters of injection molding are also obtained by repeating this process.
    The deformation, short shot and surface defects of the plastic components in Braille cell are reduced by Taguchi method and genetic algorithm. The comparison of the results shows that the prediction accuracy of genetic algorithm is better than Taguchi method. It is proved that genetic algorithm is to be able to supply a useful optimal soft computing approach in the injection molding category.
    显示于类别:[機械與機電工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    0KbUnknown238检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈