拍撲式微飛行器之製作及其現地升力之量測研究

機構典藏 > College of Engineering > Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering > Thesis > Item 987654321/35461

Please use this identifier to cite or link to this item: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/35461

Title:	拍撲式微飛行器之製作及其現地升力之量測研究
Other Titles:	The fabrication of the flapping micro aerial vehicle and its on-site measurement of unsteady lift
Authors:	何仁揚;Ho, Jen-yang
Contributors:	淡江大學機械與機電工程學系碩士班楊龍杰;Yang, Lung-jieh
Keywords:	拍撲式;微飛行器;微機電技術;聚乙烯氟化物;flapping;MAV;MEMS;PVDF
Date:	2005
Issue Date:	2010-01-11 06:36:27 (UTC+8)
Abstract:	本研究利用微機電系統技術製作拍撲式飛行器之鈦合金機翼骨架與聚對二甲苯(parylene)機翼薄膜，並結合非微機電製程製作之拍撲式傳動機構、機身骨架與尾翼，成為一全機重22gw以下，全機尺寸約15cm之拍撲式飛行器。本微飛行器放置於風洞內進行升力量測，就不同風速、拍撲頻率、攻角及機翼形狀等進行討論。本研究另使用聚乙烯氟化物(PVDF)壓電薄膜材料，製作新型拍撲式機翼結構，本研究並將新型機翼之壓電輸出訊號與風洞測力計升力訊號，進行比對探討，可於風洞測試中進行現地升力量測(on-site lift measurement)。本研究最後為微飛行器安裝鋰電池進行無遙控之自由飛行測試，飛行距離已達10~15m，成功驗證本拍撲式微飛行器飛行之可行性。 The research of micro aerial vehicles (MAVs) is a new field, which attracts much attention in the advanced aeronautical area. The flapping wing, proved by many natural flyers, is the most appropriate way of flying objects with size less than 6 inches. However, there is still plenty of room for studying on the unsteady aerodynamic characteristics of flapping wings. The flapping wing, which is light weighted and high strengthened, is composed of a titanium-alloy frame and a parylene skin in this study. Such an integration of fabrication needs the help of MEMS processing. In the wind-tunnel experimental, the signals from a load cell in the wind-tunnel and the PVDF sensors embedded in parylene wings are acquired simultaneously. Both of the lift signals from the PVDF and the load-cell are basically identical with the same flapping frequency and with the similar qualitative behaviors. Finally we integrate Li-battery into our MAV system and perform test fly of the MAV prototype. The longest distance which our MAV system can reach is 10~15m so far.
Appears in Collections:	[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis

Files in This Item:

File	Size	Format
	0Kb	Unknown	676	View/Open

Loading...