微流道蒸發現象之探討

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 學位論文 > Item 987654321/35455

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/35455

題名:	微流道蒸發現象之探討
其他題名:	Study of evaporation phenomena in micro channels
作者:	周彥志;Jou, Yan-jr
貢獻者:	淡江大學機械與機電工程學系碩士班康尚文;Kang, Shung-wen
關鍵詞:	微流道;蒸發;傾斜角;熱阻;Evaporation;micro channels;inclination angle;thermal resistance
日期:	2005
上傳時間:	2010-01-11 06:35:52 (UTC+8)
摘要:	微流道二相對流熱傳可應用於許多領域如電子冷卻等，本研究探討微流道內之蒸發現象與毛細驅動熱，利用濕蝕刻技術於(110)矽晶片上製作長75mm，流力直徑100μm ~ 250μm之矩形流道，搭配成不同流力直徑尺寸之微流道試片，量測其在不同加熱功率以及工作角度下之流體蒸發率與試片溫度，並計算比較整體熱阻之差異。經由實驗結果顯示出，當加熱功率亦即熱傳量增加之時，蒸發率會隨之升高而熱阻則隨之降低；在微流道尺寸差異所造成的影響則是得到較小之流力直徑尺寸設計同樣會使蒸發率上升與熱阻下降，另一方面本實驗也針對傾斜角度加以觀察並進行探討。實驗的結果與毛細力及毛細壓差的基礎理論趨勢吻合，也驗證了微流道流力直徑之尺寸設計與工作流體之接觸角是毛細驅動的重要指標。 Two-phase convective flow in micro channels has numerous promising applications such as electronic cooling. This study investigates evaporation phenomena and capillary-driven heat in a rectangular micro channels structure with hydraulic diameters of 100~250μm and length of 75mm. The micro channels made of (110)-orientated silicon is fabricated by bulk micromachining. The temperature distributions in micro channels chip structure, as well as the induced evaporation mass flow rate of water, were measured under different heat flux and inclination angle. Thermal resistance were calculated to evaluate the chip cooling performance. The experimental results show that with an increase of the imposed heat flux, the evaporation mass flow rate increases and thermal resistance decreases. The effect of channel size and inclination angle on the heat transfer characteristics are also examined.
顯示於類別:	[機械與機電工程學系暨研究所] 學位論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
	0Kb	Unknown	538	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....