淡江大學機構典藏:Item 987654321/35343
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62797/95867 (66%)
造访人次 : 3736503      在线人数 : 475
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/35343


    题名: 銀奈米流體應用於震盪式熱管效能之研究
    其它题名: Experimental investigation of silver nanofluid on pulsating heat pipe thermal performance
    作者: 陳慧倫;Chen, Hui-lun
    贡献者: 淡江大學機械與機電工程學系碩士班
    康尚文;Kang, Shung-wen
    关键词: 震盪式熱管;銀奈米流體;濃度;充填率;Pulsating Heat Pipes;Silver Nano-Fluid;Concentration;Filled Ratio
    日期: 2006
    上传时间: 2010-01-11 06:24:09 (UTC+8)
    摘要: 本論文是利用內徑2.4mm外徑3mm的銅管做震盪式熱管實驗。比較20nm的銀奈米流體在不同濃度(100ppm、450ppm)或不同充填量(20%、40%、60%、80%)下,在不同加熱瓦數(5w、15w、25w、35w、45w、55w、65w、75w、85w)下效率之探討,並與純水(Pure Water)做比較。總括而言,充填率在中間值(40%、60%)的效果較好,其中又以60%效率較好的居多,此可能是因為此兩個充填量在高瓦數時氣泡生成量與脈動效果勢均力敵,因此在顯熱交換方面效果相當,但60%相對於40%而言有較多的液柱可供顯熱交換,因此比較上充填率60%的散熱效果較好。整體而言各組最佳的充填率是60%,而各個充填率下最佳的充填液體是100ppm的銀奈米水溶液。其在充填率60%下加熱瓦數85W時,溫差較同充填量下的純水低了7.79℃,熱阻低了0.092℃∕W。
    This paper reports on preliminary experimental results on using copper tube having internal and external diameter with 2.4 mm and 3 mm respectively to carry out the experimental pulsating heat pipe. In order to study and measure the efficiency, we compare with 20 mm silver nano-fluid at different concentration (100ppm and 450ppm) or in the different filled ratio (20%, 40%, 60% and 80%), also applying with different heating power (5W, 15W, 35W, 45W, 55W, 65W, 75W and 85W). Finally we make a comparison with pure water. In a word, the result in the mid value (40%, 60%) of filled ratio is better. In the majority 60% of efficiency is considered much better. May be in these two filled ratio at high heating power, the power in the bubble production amount and pulsation gets balanced. The result is analogous in sensible heat exchange, 60% has more liquid slugs that are suitable for sensible heat exchange as to 40%, so in 60% of filled ratio, heat dissipation result is better than 40%. On the whole the best filled ratio is 60%, and the best filled fluid is 100ppm in silver nano-fluid. When the filled ratio is 60% and the heating power is 85 W, the difference of temperature is less than 7.79 ℃ at this same filled ratio, and the thermal resistance is also less than 0.092℃/W.
    显示于类别:[機械與機電工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    0KbUnknown216检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈