氫能程序與乙醛製程之熱能整合研究

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 學位論文 > Item 987654321/34888

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/34888

題名:	氫能程序與乙醛製程之熱能整合研究
其他題名:	Heat integrations of hydrogen process and acetaldehyde process
作者:	楊上暉;Yang, Shang-huei
貢獻者:	淡江大學化學工程與材料工程學系碩士班陳錫仁;Chen, His-jen
關鍵詞:	氫氣能源;蒸汽重組爐;變壓吸附;固態氧化物燃料電池;乙醛;換熱器網路;Hydrogen energy;Natural gas reformer;Pressure-swing adsorption;Solid oxide fuel cell;Acetaldehyde;Heat exchanger network
日期:	2006
上傳時間:	2010-01-11 05:44:13 (UTC+8)
摘要:	因應溫室氣體的排放減量與能源效率的提升，氫氣能源莫不受到工業國家的青睞與重視，配合「氫能」燃料電池的設計與發展可說是現代的顯學。「乙醛」是作為合成各種樹脂、中間體的中間原料，製程中尚可回收重要的氫氣。本論文，針對兩個製程進行研究：「氫能程序」與「乙醛製程」。論文中主要使用兩套程序軟體：AspenPlus進行製程設計與模擬，SuperTarget進行狹點分析和換熱器網路合成，有效完成研究方案的熱能整合。 To deal with the emission reduction of greenhouse gases and the improvement of energy efficiency, hydrogen energy has been attracted by the industrialized countries. As a result, the use of hydrogen in the design and development of fuel cells has become an important research issue today. On the other hand, acetaldehyde has been an important intermediate chemicals in the petrochemical industries. Additionally, this process is able to recover the precious hydrogen for use in the fuel cells. In this thesis, we have successfully carried out two case studies: one is the “hydrogen process”, and the other is the “acetaldehyde process.” Two software were utilized in the research – AspenPlus and SuperTarget. The former was used for the process synthesis, design, and simulation; the latter was used to carry out the pinch analysis and the synthesis of heat exchanger network.
顯示於類別:	[化學工程與材料工程學系暨研究所] 學位論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
	0Kb	Unknown	280	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....