淡江大學機構典藏:Item 987654321/34876
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62822/95882 (66%)
造访人次 : 4016406      在线人数 : 563
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/34876


    题名: 聚丙烯/黏土/碳黑導電奈米複合材料之製備與性質研究
    其它题名: A study on the preparation and properties of the PP/clay/carbon black conductive nanocomposites
    作者: 賀錫耀;Ho, Hsi-yao
    贡献者: 淡江大學化學工程與材料工程學系碩士班
    林國賡;Lin, Gwo-geng
    关键词: 聚丙烯;黏土;碳黑;導電高分子;熔融混煉;黏土插層;表面相形態;流變性質;Polypropylene;Clay;Carbon Black;Melt mixing;Intercalation;Morphology;Rheology
    日期: 2007
    上传时间: 2010-01-11 05:43:17 (UTC+8)
    摘要: 本論文系將聚丙烯、黏土、碳黑利用熔融混煉法製備成PP/clay/cb之導電奈米複材。以表面電阻儀量測各複材的表面電阻係數；SEM觀察碳黑與黏土在高分子基材中的分散情形與複材的相形態；XRD確定黏土的剝、插層情形。
    TGA測定各複合材料的熱裂解溫度(Td)；DSC量測複材的熔點(Tm)與結晶度的變化；DMA測定複材的固態機械性質；平板式流變儀測定複材的熔融態流變性質。結果發現PP/clay/cb複材中，經加工條件的確定，與各成份間的適當比例，可以少量的clay添加，使表面電阻大幅下降，且經由適當的相容劑的選擇與添加量，可提升複材的機械性質。並藉由各種測試的結果，探討其之間的相互關係以及對複材物性之影響。
    In this study, we aimed at blending polypropylene(PP)/clay and carbon black(cb) by melt mixing to manufacture conductive polymer nanocomposites. We used the surface resistance meter to measured surface resistivity；scanning electron microscopy(SEM) to investigate the morphology of the nanocomposites and the dispersion of clay and carbon black in the polymer matrix；XRD to analyze the exfoliation or intercalation of clay；plate-plate rheometer to measure the rheological properties .
    Thermal degradation behavior and dynamics mechanical properties of nanocomposites were analyzed by thermal gravimetric analysis(TGA) and dynamics mechanical analysis(DMA), the degree of crystallization and melt temperature(Tm) of the blends were observed by differential scanning calorimetry(DSC). The results indicated in PP/clay/cb composites, we may sharply lower the surface resistivity by adding only 2phr clay under the terms of appropriate processing condition and formula. We can also improve the mechanical properties of nanocomposites by selection of compatibilizer and the amount of adding.
    Then we’ll discuss and analyze all the results and find out the relationship between all the tests.
    显示于类别:[化學工程與材料工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    0KbUnknown279检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈