管式膜過濾之薄膜表面受力與薄膜阻力之分析模擬

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 學位論文 > Item 987654321/34871

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/34871

题名:	管式膜過濾之薄膜表面受力與薄膜阻力之分析模擬
其它题名:	Simulation of force on membrane surface and resistance of membrane in a tubular membrane filtration system
作者:	林佑儒;Lin, Yu-ju
贡献者:	淡江大學化學工程與材料工程學系碩士班吳容銘;Wu, Rome-ming
关键词:	管式膜過濾;側流;反洗;模擬;結垢;tubular-membrane filtration;side-stream;backwash;simulation;fouling
日期:	2008
上传时间:	2010-01-11 05:42:36 (UTC+8)
摘要:	管式膜過濾已廣泛的被使用在固液分離程序上，管式膜過濾模組之改良將有助於提高分離效率，並且節省操作成本。實驗方面，採用平均孔徑為3.5 um的複合陶瓷膜，過濾平均粒徑為15 um的聚甲基丙烯酸甲酯(PMMA)粉體，探討懸浮液濃度、過濾壓力、掃流速度等操作變數對濾速之影響。同時，配合流體力學軟體加以模擬，分析膜面上之剪應力的變化情形，進而找出提升濾速之方法。亦即，外加側流之管式膜過濾模組。並探討反洗操作對濾速之影響。側流膜過濾，可使膜面上之剪應力增加，清除薄膜表面之結垢；反洗操作，則可使薄膜表面的濾餅脫落，亦可清洗膜孔內部所沈積的粒子。 Tubular filtration is commonly used in solid-liquid separation processes. The improvement of tubular filtration models helps raise separation efficiency and saves operation cost. This experiment uses a filter membrane, made of Zirconia, with a mean pore size of 3.5 um is used to filter 15 um PMMA particles. We study the effects of changes in suspension concentration, transmembrane pressure, cross-flow velocity, etc. on filtration rate. Also, we use Computational Fluid Dynamics, CFD, Software Fluent 6.2 to simulate changes in shear-stress on the surface of the membrane to discover tubular-membrane filtration with side-stream, which raises filtration rate and shear-stress on the membrane, also removing fouling on the membrane surface. We then explored the effects of backwash on filtration rate, discovering that backwashing causes the cake to peel off on the membrane surface and cleans the accumulated particles inside the membrane pores.
显示于类别:	[化學工程與材料工程學系暨研究所] 學位論文

文件中的档案:

档案	大小	格式	浏览次数
	0Kb	Unknown	257	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....