淡江大學機構典藏:Item 987654321/34861
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 64176/96941 (66%)
造訪人次 : 9109251      線上人數 : 11489
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/34861


    題名: 迴流效應於平板型薄膜萃取器的解析解與實驗之研究
    其他題名: The theoretical and experimental studies of membrane extraction between parallel-plate channels with recycle
    作者: 楊治強;Yung, Jr-chiang
    貢獻者: 淡江大學化學工程與材料工程學系碩士班
    何啟東;Ho, Chii-dong
    關鍵詞: 共厄格拉茲問題;迴流效應;解析解;Conjugated Graetz problem;Recycle effect;Analytical solution
    日期: 2007
    上傳時間: 2010-01-11 05:41:58 (UTC+8)
    摘要: 本研究主要是討論薄膜萃取系統並導入回流系統之解析解研究,可分為理論分析與實驗兩大部分。理論部份是針對共軛格拉茲問題的薄膜萃取系統進行理論分析,利用分離變數法、正交展開法及特徵函數以及數解展開來求得系統中的二維濃度分佈式。本文假設流體於兩平行板間的流體視為性質均勻之不可壓縮流體完全展開之速度分佈,忽略軸傳導,且流體物性不隨溫度改變,層流流動,進而去討論引入回流比、薄膜位置及水相溶液的體積流率的影響,其結果皆與二行程無迴流的狀況比較。結果顯示對於迴流比、薄膜位置及水相體積流率的增加,系統的萃取量也會隨之提升。
    本研究亦同時設計平板型薄膜萃取器實驗,並將其結果與二維理論值做比較,結果顯示二維質傳數學模型具有相當的準確性。
    The mass transfer efficiency of parallel-plate membrane extractor module with recycle is investigated theoretically and experimentally in this study. The analytical solution is obtained by using an eigen-function expansion in terms of the power series. The experimental works in flat-plate module are conducted to confirm the accuracy of the theoretical results. The theoretical predictions were represented graphically with the volumetric flow rate, flow pattern, recycle rate, and subchannel thickness ratio as parameters compared with those obtained by the experimental runs. The influences of the design and operation parameters on the mass-transfer efficiency enhancement are also discussed.
    顯示於類別:[化學工程與材料工程學系暨研究所] 學位論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    0KbUnknown269檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋