淡江大學機構典藏:Item 987654321/34841
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64191/96979 (66%)
造访人次 : 8164114      在线人数 : 7696
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/34841


    题名: 聚丙烯/玉米澱粉崩解性複合材料之製備及性質之研究
    其它题名: A study on the preparation and properties of the polypropylene/corn starch destructible polymer composites
    作者: 林育新;Lin, Yu-hsin
    贡献者: 淡江大學化學工程與材料工程學系碩士班
    林國賡;Lin, Gwo-geng
    关键词: 聚丙烯;澱粉;崩解性複合材料;糊化;馬來酸酐;熔融混煉;流變性質;Polypropylene;Corn starch;Destructible Polymer Composites;Maleic anhydride;Melt mixing;Rheology
    日期: 2008
    上传时间: 2010-01-11 05:40:38 (UTC+8)
    摘要: 本研究主要以聚丙烯(PP)與玉米澱粉之熔融混煉製成崩解性複合材料。以添加不同接枝率之馬來酸酐相容劑(PP-g-MA或PB3200)及改質澱粉於PP基材中，進行各種性質分析。極性澱粉與非極性PP可由SEM、TGA及DSC觀察兩者不相容之情形。且隨著澱粉增加，因為嚴重相分離及低分子量之相容劑添加過量，使得機械性質下降。
    未添加相容劑之複材與摻混0.5phr PP-g-MA之複材中，仍有大顆粒玉米澱粉存在，其餘配方經混煉過程之強大剪切力，及相容劑附著，撕裂成細碎小顆粒。
    藉由FTIR可發現相容劑與澱粉(未糊化)之羥基(-OH)並無化學接枝反應，而是以物理作用力(Van der Waal force或hydrogen bonding)提升複材之相容性及機械性質。流變性質測試中，可發現複材之儲存模數(G´)，會隨著添加相容劑之相容作用而上升。由動態機械與拉伸測試分析結果，發現相容劑PB3200添加5phr是不足的，而PP-g-MA最佳值為1phr。且由於相容劑接枝率及其分子量上的差異，本研究發現添加相容劑PB3200複材之機械性質較添加相容劑PP-g-MA略差。
    In this study, we aim at blending polypropylene/corn starch by melt-
    mixing to manufacture destructible polymer composites. We compounded
    polypropylene with various concentrations of compatiblizer and modified corn starch by a Brabender mixer. Then, the different properties of destructible polymer composites were analyzed.
    The high levels of immiscibility in the polar-nonpolar corn starch-PP system were shown by SEM, DSC, and TGA. Serious phase separation and/or excess compatiblizer added may cause bad mechanical properties. The results of SEM showed that polymer composites with compatiblizers added below 0.5 phr had great starch granules. Moreover, the corn starch might be cut to small bits by great shear stress and adherent compatiblizers during melt-mixing process, if the content of compatibilizer was over 0.5 phr. The FTIR spectra showed that maleic anhydride groups had no chemical graft reaction with the hydroxyl groups in the unmodified corn starch.
    Appropriate amount of compatibilizer added may cause an improvement for the mechanical properties of polymer composites, due to the physical intermolecular force (Van der Waal force or hydrogen bonding) between the maleic anhydride and corn starch. The results of rheological analysis showed that the storage modulus went up because of the compatibilizing effect.
    We could observe that the amount of PB3200 added up to 5 phr is insufficient to improve the mechanical properties of polymer composites. The suitable concentration of compatiblizer (PP-g-MA) was 1phr. We concluded in this study, based on the different grafting ratios and molecular weight that the mechanical properties of polymer composites with PB3200 were lower than with PP-g-MA .
    显示于类别:[化學工程與材料工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    0KbUnknown383检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈