淡江大學機構典藏:Item 987654321/34821
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62805/95882 (66%)
造访人次 : 3930742      在线人数 : 668
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/34821


    题名: 落膜系統之計算流體力學模擬
    其它题名: Cfd simulation of a falling film system
    作者: 張家蓓;Chang, Chia-pei
    贡献者: 淡江大學化學工程與材料工程學系碩士班
    張煖;Chang, Hsuan
    关键词: 計算流體力學;微結構反應器;落膜;流體體積模式;兩相流;層流;computational fluid dynamics;Microreactors;falling film;VOF model;Two-phase flow;Laminar flow
    日期: 2009
    上传时间: 2010-01-11 05:39:17 (UTC+8)
    摘要: 本研究利用計算流體力學軟體(Computational fluid dynamics，CFD)，模擬微結構落膜系統內之流力與熱傳特性。本研究採用FLUENT內之流體體積(Volume of fluid, VOF)模式，氣液界面間之熱傳面積與熱傳量則利用使用者定義函數(UDF，User defined function)計算。本研究限於層流範圍。
    透過模擬建立了微結構落膜系統內部之特性分佈，包括速度、溫度、液膜與氣液界面熱傳量，並一一分析了系統條件參數之影響，包含表面張力、流體流量、液體黏度、液體密度、氣液溫度差、傾斜角度等。
    分析結果顯示，雖然是在層流範圍內，因各項條件參數之不同，液膜波動程度與液膜厚度會有差異。針對液膜厚度與熱傳係數，比較模擬結果與理論值亦發現只有在液體雷諾數很小時較接近，當雷諾數增大時，偏差程度即會加大。因此，使用CFD模擬落膜系統以確實掌握其流力與熱傳特性是有必要的。
    The thesis studies the hydrodynamics and heat transfer for a microstructure falling film device by CFD simulation using FLUENT. VOF (Volume of Fluid) model is adopted. For calculating gas-liquid interface heat transfer, a User Defined Functions (UDF) is developed. The study is limited to laminar flow region.
    Grid independent study is conducted to determine the acceptable grid size. The model is used to simulate the profiles in the system, including velocity, pressure, phase and temperature. The model is further used to investigate the effects of system parameters, including surface tension, fluid flow rates, liquid density and viscosity, angle of inclination and temperature difference.
    Even for the laminar flow system, the simulation results indicate that the liquid film characteristics, such as the eddy, the wave, and the film thickness, are affected by the condition parameters studied. Regarding the film thickness and heat transfer coefficient, comparisons between simulated results and theoretical predictions also indicate discrepancies and the difference is larger for higher liquid Reynolds number. All these conclude that using CFD simulation to obtain the hydrodynamics and heat transfer characteristics for laminar falling film is necessary.
    显示于类别:[化學工程與材料工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    0KbUnknown319检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈