淡江大學機構典藏:Item 987654321/34546
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 64180/96952 (66%)
造訪人次 : 11333007      線上人數 : 68
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/34546


    題名: 滿足安全性需求之工程設施配置模式
    其他題名: A construction site layout model considering safety requirement
    作者: 林長平;Lin, Chang-ping
    貢獻者: 淡江大學土木工程學系碩士班
    楊亦東;Yang, I-tung
    關鍵詞: 設施配置;質群演算法;設施安全;最佳化;工址規劃;facility layout;facility safety;Particle Swarm Optimization (PSO);Optimization;site plan
    日期: 2007
    上傳時間: 2010-01-11 05:22:14 (UTC+8)
    摘要: 在科技發展日趨進步的今日,各項土木工程也越趨複雜以及龐大,而在良好的設施配置模式下,不但可以減少施工中機具操作衝突與材料運輸停滯的發生,更可縮短每一個設施之間的人員與機具的移動成本與增加整體工地的生產力與安全性。
    以往設施配置問題的相關研究,大都以降低設施之間的資源運送成本為主要的考量,也確實能有效的提高工地整體的生產力以達到縮減成本的目的;但是對於近年來勞工安全衛生觀念提升的現狀,僅僅以減少成本為目標的模式已不敷使用。
    雖然實務上仍有許多規劃技術上的困難,導致工地設施配置往往無法考量工地安全的問題。但是建構一個模式用來確定設施配置,以確保每項作業能夠在不使勞工與機具發生危險的安全性的前提下,以達到迅速有效的完成作業,減少工程中人員以及物料的運送成本,實為重要之課題。
    研究中將工址以安全性為指標劃分為數個區域,考量之安全性指標包含起重設備墜落範圍與危險物料存放位置。利用質群演算法發展以縮小設施之間的運送成本為主要目的並考量安全性之工程設施配置模式。模式目標為求取特定安全性要求下設施之間的最佳運送成本。
    As technologies improve with time, construction becomes more complicated and enormous. The equipment operation confliction, material traveling lag and cost of movement cost of labor and equipment can be reduced with a good facility layout plan. The overall job site productivity and safety are also improved.
    The major concern of facility layout researches in the past was reduction of material traveling cost, which was definitely effective for cost reduction by enhancing total site productivity. Since labor safety attracts much attention in recent years, it should be incorporated into the site layout model.
    Although facility layout usually ignore safety issues due to computational difficulties, it is important to develop a facility layout model that can minimize cost of labor and material traveling and accomplish operation fast and efficiently while also ensure labor and equipment safety.
    The site was divided into several areas based on safety concerns, which include considerations of crane drop range and dangerous material storage locations. A Particle Swarm Optimization (PSO) algorithm was used to develop a facility layout planning model which can minimize traveling cost between equipments under specific safety considerations. The objective of the model is to obtain optimal traveling cost between facilities under specific safety index.
    顯示於類別:[土木工程學系暨研究所] 學位論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    0KbUnknown197檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋