English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 51771/86989 (60%)
造訪人次 : 8368698      線上人數 : 122
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/19489

    題名: Improvement in performance of cool-thermal discharge systems from ice melting with producing chilled air under constant heat flux and external refluxes
    作者: Ho, Chii-dong;Yeh, Ho-ming;Su, Ying-sia
    貢獻者: 淡江大學化學工程與材料工程學系
    日期: 2004-03
    上傳時間: 2009-11-04 16:00:56 (UTC+8)
    出版者: New York: Taylor & Francis Inc
    摘要: The effects of recycle at the ends on the heat transfer through two parallel plates with one side heated and the other side insulated in cool-thermal discharge systems by melting ice have been studied to produce chilled air under constant heat flux at the free liquid surface. The mathematical formulation was derived from an analysis of the heat transfer coupled with a moving boundary to estimate the required air mass flow rate by direct contact of air with melting ice. The numerical results show that the recycle can enhance the heat transfer rate, and thus lower outlet chilled air temperature during on-peak daytime hours, represented graphically and compared with that in an open duct of the same working dimensions without recycle. Three examples of inlet air temperatures with specified discharge fluxes are discussed. The effect of recycle on the enhancement of heat transfer efficiency is also delineated.
    關聯: Numerical heat transfer, Part A: Applications An International Journal of Computation and Methodology 45(5), pp.505-516
    DOI: 10.1080/10407780490269283
    顯示於類別:[化學工程與材料工程學系暨研究所] 期刊論文


    檔案 描述 大小格式瀏覽次數
    1040-7782_45(5)p505-516.pdf441KbAdobe PDF267檢視/開啟



    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋