English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 49195/83607 (59%)
造訪人次 : 7093139      線上人數 : 43
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/19456


    題名: Cool thermal discharge obtained with air flowing over melting ice by complete removal of melt
    作者: Ho, Chii-dong;Yeh, Ho-ming;Wang, W.P.;Wang, J.K.
    貢獻者: 淡江大學化學工程與材料工程學系
    日期: 2000-08
    上傳時間: 2009-11-04 15:52:15 (UTC+8)
    出版者: Kidlington: Pergamon
    摘要: A new device of ice melting with performance improved has been developed by complete removal of melt to produce chilled air during on-peak power consumption. Energy equations have been derived, from the integral boundary-layer analysis, for estimating the thickness of the ice melted and the thermal penetration distance in ice layer region with convective boundary condition on free surface. Numerical examples have been illustrated in which the air temperature was specified and varied with time to simulate practical systems.Results show that complete removal of melt in cool-thermal discharge systems can enhance the flux of discharge due to heat transfer being much easier than that in the systems without removal of melt. Therefore, considerable improvement in performance of cool thermal discharge can be accomplished if the system is operating with rather than without complete removal of melt.
    關聯: International Communications in Heat and Mass Transfer 27(6), pp.785-794
    DOI: 10.1016/S0735-1933(00)00159-7
    顯示於類別:[化學工程與材料工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    0735-1933_27(6)p785-794.pdf407KbAdobe PDF287檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋