淡江大學機構典藏:Item 987654321/18656
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62797/95867 (66%)
造訪人次 : 3737888      線上人數 : 446
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/18656


    題名: 主要節瘤與次要節瘤在節理面剪力行為之角色
    其他題名: The Effect of Primary and Secondary Asperities on the Shear Behavior
    作者: 楊長義;顏國慶;李偉強
    貢獻者: 淡江大學土木工程學系
    關鍵詞: 節理面;剪力行為;節瘤;線切割;Joint Plane;Shear Behavior;Asperity;Wire Cut
    日期: 2001-08-30
    上傳時間: 2009-09-16 18:13:51 (UTC+8)
    摘要: 岩石節理面係由許多大小不等之起伏狀節瘤組合而成,本文以傅立葉級數觀念將節理面分解成一系列之週期函數,再以前5階週期函數疊加模擬只含主要節瘤之二維與三維節理面、以前40階函數疊加模擬含主要節瘤加次要節瘤之節理面。並以2D及3D石膏模擬試體進行高低應力下之直剪試驗,期比較主要節瘤與次要節瘤在不同應力環境下、不同維度下剪力行為之異同。文中並將層狀成形法(LOM)應用於3D節理表面模型之仿製上,亦利用雷射剖面儀之預定量測軌跡功能,使其可以簡易以電熱絲切割珍珠板,以製作2D節理剖面模具。
    The roughness of rock joints is consisting of many sized asperities and divided into the primary asperity and secondary asperity. This paper used the method superimposing five and forty components of sine-shaped sub-profiles with different wavelengths and amplitudes to simulate two smoother and rougher joint profiles, respectively. The 2D model profile is cut using the laser profilometer and 3D joint surface is generated using the LOM (Laminated object manufacturing). The aim of this study is to clarify the difference of primary and secondary asperity on 2D profile and 3D surface.
    關聯: 第九屆大地工程學術研討會論文集=Proceedings of 9th Conference on Current Researches in Geotechnical Engineering,頁 B006~1-B006~8
    顯示於類別:[土木工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    主要節瘤與次要節瘤在節理面剪力行為之角色_中文摘要.docx摘要15KbMicrosoft Word91檢視/開啟
    主要節瘤與次要節瘤在節理面剪力行為之角色_英文摘要.docx摘要15KbMicrosoft Word135檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋