Enhancing photocatalytic performance of regular porous silver bromide structures through 3D printing

doi:10.1016/j.addma.2023.103866

淡江大學機構典藏 > 工學院 > 水資源及環境工程學系暨研究所 > 期刊論文 > Item 987654321/126829

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/126829

題名:	Enhancing photocatalytic performance of regular porous silver bromide structures through 3D printing
作者:	Kuo, Chun-yu;Shih, Chung-hao;Lee, Chen-kai;Shen, Bo-heng;Lin, Wei-hsiang;Lee, Po-ching;Lin, C.B.
關鍵詞:	Silver bromide In situ precipitation Azo dyes Escherichia coli
日期:	2023-11-10
上傳時間:	2025-03-20 09:26:49 (UTC+8)
出版者:	ELSEVIER
摘要:	This study introduces the innovative method of in-situ precipitation (ISP) 3D printing technology for fabricating photocatalyst structures capable of efficiently degrading water pollutants. The technology involves using silver nitrate aqueous solution to print directly on the surface of solidified NaBr aqueous solution, resulting in the formation of regular porous silver bromide structures. The structures are then densified through drying and sintering, followed by photoreduction using ultraviolet radiation to create Ag@(silver atom cluster)AgBr photocatalyst structures. Experimental results demonstrate the effectiveness of this photocatalyst structure in degrading azo dyes (Orange II) and eliminating Escherichia coli (E. coli) under visible light and ultraviolet light irradiation. The degradation of azo dyes and the sterilization of E. coli follow first-order kinetic reactions, with the photocatalyst module maintaining an 84.8% degradation rate after five recycling cycles. Complete elimination E. coli of the photocatalytic module is achieved within 120 min, and its sterilization effect follows a hyperbolic reaction. The study further confirms the durability and reusability of the photocatalyst structure, highlighting ISP 3D printing technology as a promising approach for fabricating efficient photocatalyst structures to address water pollution challenges in water treatment and environmental protection.
關聯:	Additive Manufacturing 78,　103866
DOI:	10.1016/j.addma.2023.103866
顯示於類別:	[水資源及環境工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	21	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....