English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 64178/96951 (66%)
造訪人次 : 9564434      線上人數 : 17125
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/126409


    題名: Characterizing sliding wear behavior of A1100/AlFe (p) composites produced via repeated fold-forging and annealing
    作者: Tseng, Yu-fong;Liu, Chao-hwa;Lin, Ching-bin
    關鍵詞: Composites;Intermetallic;Morphology;Wear
    日期: 2024-09-27
    上傳時間: 2024-10-14 12:05:20 (UTC+8)
    摘要: Aluminum matrix/aluminum-iron intermetallic composite materials pose challenges in plastic processing due to the susceptibility of hard intermetallic compound particles to fracture. This study introduces a novel fabrication method involving pure iron mesh, hot-dip aluminum plating, and solidification. Through ten consecutive folding, forging, and intermediate annealing cycles, aluminum matrix and iron undergo diffusion, leading to the formation of Fe2Al5 and FeAl3 interface reaction layers, as confirmed by X-ray diffraction analysis. Subsequent forging cycles cause the breakage or detachment of Fe2Al5 and FeAl3 particles from the interface, resulting in the formation of large-sized Fe2Al5 and small-sized Fe2Al5 intermetallic particles. FeAl3 intermetallic particles are observed via microscopic examination. These particles can be uniformly dispersed within the aluminum matrix through plastic flow, enabling the successful fabrication of A1100/Fe2Al5 and AlFe3 composite sheets. Furthermore, the study investigates the impact of intermetallic compound content, sliding speed, and forward load on the dry sliding wear of A1100/FeAl composites. It is found that Fe2Al5 and AlFe3 intermetallic compound particles effectively mitigate adhesive wear, plowing, and oxidative wear of the composites. With an AlFe intermetallic compound content of 4.3 wt.%, the volume wear rate remains low under conditions corresponding to PV = 56.652 (equivalent to a normal load of 19.6 kPa and a sliding speed of 2.87 m s−1).
    關聯: International Journal of Materials Research 115(10), p.821-835
    DOI: 10.1515/ijmr-2021-8412
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML86檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋