淡江大學機構典藏:Item 987654321/123278
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64191/96979 (66%)
造访人次 : 8345510      在线人数 : 9065
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/123278


    题名: Correlation Between Fiber Orientation and Geometrical Shrinkage of Injected Parts Under the Influence of Flow-Fiber Coupling Effect
    作者: Chao-Tsai Huang*;Jun-Zheng Wang;Cheng-Hong Lai;Sheng-Jye Hwang;Po-Wei Huang;Hsin-Shu Peng
    关键词: Lightweight technology;Fiber reinforced thermoplastics (FRP);Flow-fiber coupling;Numerical simulation;Micro-computed tomography (micro-CT);Injection molding
    日期: 2022-09-26
    上传时间: 2023-04-28 17:30:42 (UTC+8)
    出版者: Korean Society of Precision Engineering
    摘要: Fiber reinforced thermoplastics (FRP) have been widely used in automotive industry. However, how does the flow-fiber coupling effect influence the micro fiber orientation and further affect the geometrical shrinkage of the final part that is not fully understood yet. In this study, a complex center-gated plate has been applied to study the influence of the flow-fiber coupling effect on the fiber orientation variation and the geometrical change through numerical simulation. Then the practical verification through the micro-computed tomography (micro-CT) and image processing technology was carried out. Results show that in the presence of the flow-fiber coupling the required spruce pressure will be higher compared to no coupling case. In addition, the melt flow front pattern will be changed from “convex-flat” to “convex-concave” under the influence of this coupling. Moreover, in the presence of the flow-fiber coupling effect, the wider core width for fiber orientation tensor in the flow direction (A11) can be obtained from upstream to downstream regions for the same model. However, in the downstream region (i.e. in the FR), the flow-fiber coupling effect is more significantly due to the action of less shear rate in that region. Finally, through the measurement of the left–right asymmetrical shape of the FR for Model I (or Model II), the reason is that the flow-fiber coupling effect will switch the fiber orientation from the flow direction (A11) dominate to the cross-flow direction (A22) dominate. This asymmetrical fiber orientation distribution will further create that asymmetrical shrinkage shape of final part. The correlation between fiber orientation and geometrical shrinkage can be achieved.
    關聯: International Journal of Precision Engineering and Manufacturing-Green Technology 10, p.1039–1060
    DOI: 10.1007/s40684-022-00473-5
    显示于类别:[化學工程與材料工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML135检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈