淡江大學機構典藏:Item 987654321/121325
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 59573/92818 (64%)
造访人次 : 817518      在线人数 : 30
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/121325


    题名: A Methodology to Predict and Optimize Ease of Assembly for Injected Parts in a Family-Mold System
    作者: Huang, Chao-Tsai;Lin, Tsai-Wen;Jong, Wen-Ren;Chen, Shia-Chung
    关键词: injection molding;degree of assembly;a family mold system;CAE-DOE optimization
    日期: 2021-09-10
    上传时间: 2021-09-24 12:13:11 (UTC+8)
    出版者: MPDI
    摘要: In this study, the assembly behavior for two injected components made by a family mold system has been investigated. Specifically, a feasible method has been proposed to evaluate the char-acteristic length for two components within a family mold system by using numerical simulation and experimental validation. Results show that as the packing pressure increases, the product index (characteristic length) becomes worse. The tendency is consistent for both simulation prediction and experimental observation. However, for the same operation condition setting through a basic test, there are some difference in the product index between the simulation pre-diction and experimental observation. Specifically, product index difference of the experimental observation is 1.65 times over that of the simulation prediction. To realize that difference between simulation and experiment, the driving force index (DFI) based on the injection pressure history curve was proposed. Through the DFI investigation, it shows that the internal driving force of the experimental system is 1.59 times over that of the simulation one. The DFI is further used as the basis for doing the machine calibration. Furthermore, after finished the machine calibration, the CAE-DOE strategy can optimize the ease of assembly up to 20%. The result is validated by ex-perimental observation.
    關聯: Polymers 13(18), 3065
    DOI: 10.3390/polym13183065
    显示于类别:[化學工程與材料工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML22检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈