淡江大學機構典藏:Item 987654321/121111
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64180/96952 (66%)
造访人次 : 11296111      在线人数 : 1432
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/121111


    题名: INVESTIGATION ON THE DEGREE OF ASSEMBLY FOR COMPONENTS IN AN INJECTION FAMILY MOLD SYSTEM
    作者: Lin, Tsai-Wen;Huang, Chao-Tsai;Jong, Wen-Ren;Chen, Shia-Chung
    关键词: Family mold;degree of assembly;CAE simulation
    日期: 2021-05-11
    上传时间: 2021-08-26 12:13:06 (UTC+8)
    出版者: SPE
    摘要: The main target for Design for Manufacturing and Assembly (DFMA) is to integrate multiple components with multiple functions to minimize cost and efforts. In addition, a family mold system has been utilized in industrial manufacturing to make a series integrated components for years. However, there is very few information to the degree of assembly for a single component or components. In this study, the degree of assembly using a family mold system with two different components has been investigated. The study methods include numerical simulation and experimental observation. Firstly, the packing pressure is adopted as the practical operation parameter to affect the variation of degree of assembly. Then the pre-defined characteristic lengths were utilized to catch the degree of assembly. Results showed that when a higher packing pressure applied in injection molding, it will results in more difficulty in the assembly for Part A and B by numerical prediction. Furthermore, the experimental validation on the degree of assembly based on the characteristic lengths has also performed. The tendency is quite consistent for both numerical simulation and experimental estimation. However, there is some gap between simulation prediction and experimental measurement for the same operation condition setting. To reduce that gap, future work is planned.
    關聯: SPE Technical Papers, ANTEC2021
    显示于类别:[化學工程與材料工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML90检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈