Loading...
|
Please use this identifier to cite or link to this item:
https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/121017
|
| Title: | An automated algorithm for mapping building impervious areas from airborne LiDAR point-cloud data for flood hydrology |
| Authors: | Hung, Chen-Ling J.;James, L. Allan;Hodgson, Michael E. |
| Keywords: | urban flood hydrology;imperviousness;building detection;EPA SWMM;storm water |
| Date: | 2018-03-22 |
| Issue Date: | 2021-08-24 12:14:47 (UTC+8) |
| Publisher: | Taylor & Francis |
| Abstract: | Buildings, as impervious surfaces, are an important component of total impervious surface areas that drive urban stormwater response to intense rainfall events. Most stormwater models that use percent impervious area (PIA) are spatially lumped models and do not require precise locations of building roofs, as in other applications of building maps, but do require accurate estimates of total impervious areas within the geographic units of observation (e.g. city blocks or sub-watershed units). Two-dimensional mapping of buildings from aerial imagery requires laborious efforts from image analysts or elaborate image analysis techniques using high spatial resolution imagery. Moreover, large uncertainties exist where tall, dense vegetation obscures the structures. Analyzing LiDAR point-cloud data, however, can distinguish buildings from vegetation canopy and facilitate the mapping of buildings. This paper presents a new building extraction approach that is based on and optimized for estimating building impervious areas (BIA) for hydrologic purposes and can be used with standard GIS software to identify building roofs under tall, thick canopy. Accuracy assessment methods are presented that can optimize model performance for modeling BIA within the geographic units of observation for hydrologic applications. The Building Extraction from LiDAR Last Returns (BELLR) model, a 2.5D rule-based GIS model, uses a non-spatial, local vertical difference filter (VDF) on LiDAR point-cloud data to automatically identify and map building footprints. The model includes an absolute difference in elevation (AdE) parameter in the VDF that compares the difference between mean and modal elevations of last-returns in each cell.
The BELLR model is calibrated for an extensive inner-city, highly urbanized small watershed in Columbia, South Carolina, USA that is covered by tall, thick vegetation canopy that obscures many buildings. The calibration of BELLR used a set of building locations compiled by photo-analysts, and validation used independent building reference data. The model is applied to two residential neighborhoods, one of which is a residential area within the primary watershed and the other is a younger suburban neighborhood with a less-well developed tree canopy used as a validation site. Performance results indicate that the BELLR model is highly sensitive to concavity in the lasboundary tool of LAStools® and those settings are highly site specific. The model is also sensitive to cell size and the AdE threshold values. However, properly calibrated the BIA for the two residential sites could be estimated within 1% error for optimized experiments.
To examine results in a hydrologic application, the BELLR estimated BIAs were tested using two different types of hydrologic models to compare BELLR results with results using the National Land Cover Database (NLCD) 2011 Percent Developed Imperviousness data. The BELLR BIA values provide more accurate results than the use of the 2011 NLCD PIA data in both models. The VDF developed in this study to map buildings could be applied to LiDAR point-cloud filtering algorithms for feature extraction in machine learning or mapping other planar surfaces in more broad-based land-cover classifications. |
| Relation: | GIScience & Remote Sensing,55 (6),p.793-816 |
| DOI: | 10.1080/15481603.2018.1452588 |
| Appears in Collections: | [Graduate Institute & Department of Water Resources and Environmental Engineering] Journal Article
|
Files in This Item:
| File |
Description |
Size | Format | |
|---|
| An automated algorithm for mapping building impervious areas from airborne LiDAR point-cloud data for flood hydrology.pdf | | 2469Kb | Adobe PDF | 1 | View/Open | | index.html | | 0Kb | HTML | 95 | View/Open |
|
All items in 機構典藏 are protected by copyright, with all rights reserved.
|
