淡江大學機構典藏:Item 987654321/120349
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62861/95882 (66%)
造訪人次 : 4244740      線上人數 : 618
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/120349


    題名: Machine Calibration Effect on the Optimization through Design of experiments (DOE) in Injection Mold
    作者: Xu, Rui-Ting;Huang, Chao-Tsai;Chen, Po-Hsuan;Jong, Wen-Ren;Chang, Rong-Yeu
    日期: 2020-05-05
    上傳時間: 2021-03-20 12:11:11 (UTC+8)
    摘要: Quality issue is one of the most important concerns in injection molding. However, before executing mass production, how to retain good quality is one of the crucial factors in injection molding. To retain good quality, it is commonly using CAE to assist from original design to revision and to fabrication. However, even using CAE, it doesn’t guarantee the quality factors obtained from CAE can be applied to real experiments. Moreover, the design of experiment (DOE) method has been utilized into injection molding product development. Today, there are still some challenges when people using DOE in injection molding. In this study, we have designed one injection molding system to define quality factor based on a circle plate. Then, we have tried to perform a series virtual DOE testing for injection molding using CAE to optimize the process condition. Furthermore, we also performed real DOE experiment to verify the virtual DOE concept. Finally, we will discuss about the machine calibration effect on the accuracy of quality comparison. Results shows that before machine calibrated, both virtual CAE-DOE and real DOE optimization can provide better quality for injection parts. However, there is some difference between the virtual and real DOE results. To find out why the difference between the virtual and real DOE results happened, we have investigated the machine feature and tried to calibrate it. After machine calibrated, the difference between the virtual and real DOE results has been improved by 58%.
    關聯: SPE Technical Papers, ANTEC2020-054, p.1-6
    顯示於類別:[化學工程與材料工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    index.html0KbHTML78檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋