淡江大學機構典藏:Item 987654321/119562
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64178/96951 (66%)
造访人次 : 9910563      在线人数 : 19953
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/119562


    题名: A novel anatomical thin titanium mesh plate with patient-matched bending technique for orbital floor reconstruction
    作者: Chen, Chih-Hao;Chen, Chien-Tzung;Wang, Po-Fang;Wang, Yu-Tzu;Hsu, Pin-Hsin;Lin, Chun-Li
    关键词: Bending;Orbital floor fracture;Patient-matched;Plate;Stamping analysis
    日期: 2018-09
    上传时间: 2020-11-16 12:10:53 (UTC+8)
    摘要: This study developed an anatomical thin titanium mesh (ATTM) plate for Asian orbital floor fracture based on the medical image database. The computer aided stamping analysis was performed on four hole/slot patterns included the control type without hole design, circular hole pattern, slot pattern and hole/slot hybrid patterns within the ATTM plate with upper/lower dies of averaged orbital cavity reconstruction models. The curved-fan ATTM plate with 0.4 mm thickness was manufactured and pre-bent using a patient matched stamping process to verify its feasibility and the interfacial fitness between the plate and bone on the orbital floor fracture model. The stamping analysis found that the hole/slot hybrid patterns design resulted in the most favorable performance among all designs owing to the lowest maximum von-Mises stress/strain and spring-back value. The interfacial adaption results test showed that the average patient-matched stamping bending gap size was only 0.821 mm and the operative time was about 8 s. This study concluded that the curved-fan ATTM plate with hole/slot hybrid pattern design and patient-matched pre-bent technique can fit the ATTM plate/orbital cavity interface well, decrease unstable fracture segment mobility and improve the overall reduction efficiency.
    關聯: Journal of Cranio-Maxillofacial Surgery 46(9), p.1526-1532
    DOI: 10.1016/j.jcms.2018.04.014
    显示于类别:[機械與機電工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML145检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈