Study on the Design-induced Fiber Orientation and Their Influences on Warpage in Injection Fiber Reinforced Plastic (FRP) Parts

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/118940

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/118940

题名:	Study on the Design-induced Fiber Orientation and Their Influences on Warpage in Injection Fiber Reinforced Plastic (FRP) Parts
作者:	Chu, Jia-Hao;Huang, Chao-Tsai (CT);Hsu, Chia;Fu, Wei-Wen;Hwang, Sheng-Jye
关键词:	lightweight;fiber-reinforced plastics (FRP);injection molding;fiber microstructure
日期:	2020-05-05
上传时间:	2020-07-20 12:10:22 (UTC+8)
出版者:	Society of Plastics Engineers
摘要:	Due to its excellent properties, the fiber-reinforced plastics (FRP) material has been applied into industry as one of the major lightweight technologies, especially for automotive or aerospace products. However, since the microstructures of fiber inside plastic matrix are very complex, they are not easy to be visualized and managed. Specifically, the connection from microstructures to the physical properties of the final product is far from our understanding. In this study, we have tried to correlate from fiber microstructure feature to macro-property for fiber reinforced thermoplastic (FRP) in injection molding process. Specifically, we have designed an injection molding system with three standard specimens based on ASTM D638 where those specimens have different gate designs. The different gate design can change flow behavior and further provide different fiber orientation distribution (FOD) features. In the presence of fibers, the warpage of the full model can be diminished significantly. In addition, the improvement of mechanical property by introducing fiber into PP, in the case study, either through the side gate or the sprue gate, the tensile strength of PP+SF is over three times than that of pure PP. However, it is noted that the strength of Model I (side gate design) is always greater than that of Model II (sprue gate design) experimentally in the same injection molded part. The reason why the tensile strength of Model I is greater than that of Model II, it is due to the design-induced fiber orientation to melt which will further enhance the tensile strength of Model I. Finally, a series simulation studies with FOD have been performed. Results of FOD difference are consistent with the observation of the tensile strength difference.
關聯:	SPE Technical Papers, ANTEC2020-040(7 pages)
显示于类别:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的档案:

没有与此文件相关的档案.

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....