淡江大學機構典藏:Item 987654321/118518
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62805/95882 (66%)
造訪人次 : 3929432      線上人數 : 831
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/118518


    題名: Study on the Deviation and Internal Mechanism between Numerical Simulation and Experiments in Injection Molding Product Development
    作者: Huang, Chao-Tsai;Chen, Yi-Hsuan Hsu Po-Hsuan;Jong, Wen-Ren
    關鍵詞: injection molding;warpage;deviation between CAE and experiment
    日期: 2019-12-18
    上傳時間: 2020-04-09 12:11:49 (UTC+8)
    摘要: Recently, many Internet of Things (IoT) have been proposed and developing to industry and markets. They drive people to design and create an automatic production environment. Before executing automatic production, how to retain good quality for injection products is one of the crucial factors. To retain good quality, it is commonly using CAE to assist from original design to revision and to fabrication. However, even using CAE, it doesn’t guarantee the quality factors obtained from CAE can be applied to real experiments. In this study, firstly we have focused on what the major factors were to cause the difference between CAE simulation and real testing on the warpage quality. We further applied numerical simulation to decouple what the main driving forces are to make the difference between simulation and experiment. Results showed that in the original process setting, the warpage difference between simulation prediction and experiment is 0.34 mm. We further found out the major difference came from the injection filling response is too slow (delayed about 29%) and packing pressure is insufficient (23% lower) in real experiment comparing to simulation prediction. Moreover, after calibrate the machine response the warpage difference between simulation prediction and experiment is reduced to 0.12 mm. It is improved about 65% in accuracy. Moreover, we have introduced viscoelastic (VE) effect into this study. Result showed that in the presence of the VE effect the warpage difference between simulation prediction and experiment is further reduced to 0.04 mm. Obviously, the VE has a great impact in this case study. However, the influence of VE is great or not for other cases that should be further studied.
    關聯: APCOM2019論文集
    顯示於類別:[化學工程與材料工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    index.html0KbHTML117檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋