Tool Path and Sheet Thickness Distribution of Axisymmetric Cup in Single Point Incremental Forming

doi:10.4028/www.scientific.net/KEM.823.1

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/118394

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/118394

題名:	Tool Path and Sheet Thickness Distribution of Axisymmetric Cup in Single Point Incremental Forming
作者:	Li, Ching-Lun;Ni, Yung-Kuan;Haw, Yang;Lu, Yuung-Hwa
關鍵詞:	Single Point Incremental Forming;Gradient Theory;Tool Path;Forming Characteristics
日期:	2019-09
上傳時間:	2020-03-26 12:10:09 (UTC+8)
出版者:	Trans Tech Publications Ltd, Switzerland
摘要:	This study involved planning different tool paths for an axisymmetric cup to explore the forming characteristics of the single point incremental forming (SPIF) process. In addition, this study developed a gradient theory to compute the inclined angle between the tangential and horizontal directions of the cup formed using single point incremental forming. The sheet thickness distribution of the cup was also calculated. To verify the theory, circle arc cups were formed by CNC machining using different tool paths. It was found that the cup formed using the spiral evolutional snail-line tool path produced a better surface than that formed using the equal height evolutional tool path. The sheet thicknesses of circle arc cups obtained by the experiment and using the cosine law were compared. A larger deviation was noted in the initial portion of the cup, whereas a smaller deviation was found in the other portion. This study also adopted a dual-conical cup to investigate the relationship between thickness and the initial inclined angle at the initial portion. It was found that a larger initial inclined angle led to good coincidence between the experimental and theoretical sheet thicknesses.
關聯:	Key Engineering Materials 823, p.1-7
DOI:	10.4028/www.scientific.net/KEM.823.1
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	122	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....