Design, Manufacturing, and Flight Testing of an Experimental Flying Wing UAV

淡江大學機構典藏 > 工學院 > 航空太空工程學系暨研究所 > 期刊論文 > Item 987654321/118242

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/118242

題名:	Design, Manufacturing, and Flight Testing of an Experimental Flying Wing UAV
作者:	Pei-Hsiang Chung;Der-Ming Ma;Jaw-Kuen Shiau
關鍵詞:	unmanned aerial vehicle (UAV) design;flight testing;flying wing
日期:	2019-07-28
上傳時間:	2020-03-12 12:10:14 (UTC+8)
出版者:	MDPI
摘要:	This paper presents the design, manufacturing, and flight testing of an electric-powered experimental flying wing unmanned aerial vehicle (UAV). The design process starts with defining the performance requirements including the stall speed, maximal speed, cruise altitude, absolute ceiling, and turn radius and speed. The wing loading and associated power loading are obtained based on the defined performance requirements. The wing area, UAV mass, and power requirements are determined from the endurance and payload requirements. The power requirement determines the motor size. Aerodynamics and stability designs are obtained based on the selected airfoil and obtained wing area. After completing the design, the UAV is manufactured using composite materials. The UAV is equipped with an AXi 4130/20 kv305 brushless motor and a Pixhawk flight control board. Its total weight is 8.6 kg. Flight tests were conducted to evaluate the UAV’s performance and dynamic characteristics and to demonstrate the success of the design.
關聯:	applied sciences 9(15), p.3043
DOI:	10.3390/app9153043
顯示於類別:	[航空太空工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	213	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章