English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 58286/91808 (63%)
造访人次 : 13819531      在线人数 : 65
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/118242


    题名: Design, Manufacturing, and Flight Testing of an Experimental Flying Wing UAV
    作者: Chung, Pei-Hsiang;Ma, Der-Ming;Shiau, Jaw-Kuen
    关键词: unmanned aerial vehicle (UAV) design;flight testing;flying wing
    日期: 2019-07-28
    上传时间: 2020-03-12 12:10:14 (UTC+8)
    出版者: MDPI
    摘要: This paper presents the design, manufacturing, and flight testing of an electric-powered experimental flying wing unmanned aerial vehicle (UAV). The design process starts with defining the performance requirements including the stall speed, maximal speed, cruise altitude, absolute ceiling, and turn radius and speed. The wing loading and associated power loading are obtained based on the defined performance requirements. The wing area, UAV mass, and power requirements are determined from the endurance and payload requirements. The power requirement determines the motor size. Aerodynamics and stability designs are obtained based on the selected airfoil and obtained wing area. After completing the design, the UAV is manufactured using composite materials. The UAV is equipped with an AXi 4130/20 kv305 brushless motor and a Pixhawk flight control board. Its total weight is 8.6 kg. Flight tests were conducted to evaluate the UAV’s performance and dynamic characteristics and to demonstrate the success of the design.
    關聯: applied sciences 9(15), 3043
    DOI: 10.3390/app9153043
    显示于类别:[航空太空工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML69检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈