Synthesis, analysis and 3D printing of flapping mechanisms

doi:10.1504/IJMPT.2019.102932

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/118120

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/118120

題名:	Synthesis, analysis and 3D printing of flapping mechanisms
作者:	Balasubramanian, E;Chandrasekhar, U;Siva, Sakthi Velan S;Yang, Lung-Jieh;Salunkhe, Sachin
關鍵詞:	flapping frequency;flap angle;kinematics;synthesis;3D printing;3DP;fused deposition modelling;FDM;digital light processing;DLP.
日期:	2019-09-01
上傳時間:	2020-02-22 12:10:18 (UTC+8)
摘要:	This paper presents a methodology for designing of flapping mechanisms and rapid fabrication using 3D printing (3DP) technique for subsequent application in micro aerial vehicles. A key feature of the present study is constraining of the mechanism weight and aerial vehicle size to stipulated limits while optimising the functional features of flap angle, flapping frequency and lift. These contradictory set of requirements are fulfilled through syntheses involving linkage number, linkage type and dimensions. As geometrical features are intricate and the required quantity is small, 3DP techniques of fused deposition modelling and digital light processing (DLP) of photopolymers are used as fabrication options. Assembly integration studies are carried out using 3DP parts and the practical feasibility of the suggested approach as a potential alternative to traditional injection moulding is established. Performance evaluation of the developed mechanism indicates conformance with design intent. The presented methodology demonstrates a novel avenue for rapid realisation of an important class of flapping aerial vehicles that have wide ranging applications in surveillance missions.
關聯:	International Journal of Materials and Product Technology 59(3), p.212-228
DOI:	10.1504/IJMPT.2019.102932
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	200	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....