Manufacture and Test of a High Temperature Heat Pipe

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/118051

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/118051

题名:	Manufacture and Test of a High Temperature Heat Pipe
作者:	Shung-Wen Kang;Huan-Ming Yeh;Meng-Chang Tsai;His-Hsiang Wu
关键词:	High Temperature Heat Pipe;Metal Sodium;Stainless Steel Screen
日期:	2019-09-30
上传时间:	2020-01-21 12:10:44 (UTC+8)
出版者:	Tamkang University
摘要:	Heat pipe play an important role in high temperature energy transfer system and storage system. It can be applied to the areas such as solar energy storage system and waste heat recovery. High temperature heat pipes with 420 mm in length, 13 mm in outer diameter and 2 mm in tube thickness have been developed and tested. The device was made of Inconel 600 equipped with a 316 stainless steel 100 mesh wick. The working fluid was metal sodium with a filling ratio of 10% (2.86 g). Heat pipes start-up and thermal characteristics were investigated at different orientations with slopes of -15, 0, +45 and +90 while heat sink temperatures were kept at 27 C air environment. The evaporator temperature of 800 C was achieved when the input power was set at 790 W. It has been found that the lowest value of the heat pipes thermal resistance was 0.11 C/W when the inclination angle was at 90.
關聯:	Journal of Applied Science and Engineering 22(3), p.493-499
DOI:	10.6180/jase.201909_22(3).0010
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	205	检视/开启
Manufacture and Test of a High Temperature Heat Pipe.pdf		981Kb	Adobe PDF	193	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章